Monitoring Response Time of Devices

This section is applicable to the following editions of IT360:

• Professional Edition
• Enterprise Edition - Probe only [not applicable / relevant to the Central Server]
• MSP Edition - Probe only [not applicable / relevant to the Central Server]

Any configuration / changes to the devices needs to be done at the respective Probes. However, you may view the device snapshots from the Central Server.

You can monitor the response time on a per device basis and view even the packet loss reports.

1. Go to the device snapshot page.
2. Look at the Response Time value shown on the right to know the device response time..
3. Click the corresponding small icons to see the response time report for the last 7 or 30 days.
4. Click the  icon to configure threshold value in milliseconds. If the device response time exceeds the threshold value, a threshold violation alarm is triggered. This alarm can inturn be notified.