OpUtils

-

Switch Port & IP Address Management Software

Featured Tools

  • Switch Port Mapper - - Tool to check and display the devices connected to the ports of a Switch.
  • IP Address Manager - - Tool to scan the subnets and identify the used and available IP Addresses.
  • Rogue Detection - Tool to detect the unauthorized network access.
  • Bandwidth Monitor - Tool to monitor the average BPS and percentage utilization of all the Interfaces in the specified device.
  • Network Monitor - Tool to monitor the availability and response times of critical network devices.
  • Config File Manager - Config File Manager downloads/uploads the StartUp and/or the Running config files from the given CISCO device and displays them. It also shows the colored difference between the two files.
  • DHCP Scope Monitor - Tool to find the used and available IP addresses in the scopes of the DHCP Server.
  • Trap Receiver - Tool to view the SNMP Traps sent from the network devices.
  • MAC IP List - To get the list of MAC and IP Addresses in the network.

Diagnostic Tools

  • Ping Tool - Tool to ping a node to check its connectivity status in the network.
  • Ping Scan - Tool to scan a range of IP addresses to check if they are alive and reachable in the network.
  • SNMP Ping - Tool to ping a node, for checking if the node is SNMP enabled.
  • SNMP Scan - Tool to scan a range of SNMP-enabled IP addresses to check if they are alive and reachable.
  • Proxy Ping - Tool to do a ping test from a remote router to another remote device.
  • Trace Route - Tool to record the route (the specific gateway computers at each hop) through the network from Host to the target Destination.

Address Monitoring Tools

  • MAC Address Resolver - Tool to resolve IP Address or Host Name to MAC Address and vice versa.
  • MAC Address Scan - Tool to discover the physical address of a given range of devices and map them with the corresponding IP addresses.
  • DNS Resolver - A data query tool to translate host name into IP Address and vice versa.
  • DNS Scan - Tool to audit the given range of IPs for Reverse Lookup.

Network Monitoring Tools

  • Wake-On-LAN - Tool to remotely power on a PC.
  • Port Scanner - Tool to scan the ports of a system.
  • System Details Update - Tool to view and update the details, such as Name, Location, and Contact details.
  • System Explorer - Tool to view the complete details of a device like, disk space, cpu usage, processes, installed software, etc.
  • TCP Reset - Tool to find and reset the list of TCP connections established with the switches, routers, etc., in the network.

Cisco Tools

  • Device Scan - Utility to scan a subnet or a range of IP Addresses to collect the details of the Cisco Devices in the scanned range.
  • TFTP Server - Tool to view the Config Files available in the TFTP Root. It also enables changing the TFTP Root directory and edit/upload config files from here.
  • Device Explorer - Tool to view the complete details of a cisco device like Device Snapshot, Chassis, Flash, IOS, IP Routes, Device Monitor, Interfaces, and Access Lists.

SNMP Tools

  • SNMP Walker - Tool to retrieve information for a set of OIDs in a MIB.
  • SNMP Table - Tool to retrieve the data for the specified Table OID from the device.
  • SNMP Graph - Tool to gather data in real time and to draw graph for any SNMP device using the available data.
  • MIB Browser - Tool to load, browse, search, and walk through SNMP MIBs, and perform certain basic SNMP functions.
  • MIB Viewer - Tool to retrieve and analyze information about a MIB or a specific MIB OID/node from a MIB file.
  • Community Checker - Tool to detect the read and write community strings of the devices in the network.

Professional Edition

Standard Edition

Free Edition

The Professional edition of OpUtils includes all the 34 tools mentioned in the tools matrix .

The Standard edition of the OpUtils product includes the 27 tools mentioned in the tools matrix . At any point of time users can upgrade to the Professional edition of the product.

The free edition of the OpUtils product includes the 16 tools mentioned in the tools matrix . At any point of time users can upgrade to the Standard or the Professional edition of the product.