DHCP Scope MonitorDHCP Scope Monitor DHCP Scope Monitor - Available in Standard Edition


The DHCP Scope Monitor utility of the OpUtils software helps you to monitor the DHCP Scopes to find the available IP Address count in each of them. When the available IP Address count falls below a certain number, the results are shown in red color.

Adding DHCP Servers to be Monitored

  1. Click the Tools tab.

  2. Choose the DHCP Scope Monitor available under the Address Monitoring category.

  3. Specify the Name or the IP Address of the DHCP Server.

  4. Specify the SNMP Read Community of the DHCP Server.

  5. Click Get DHCP Scope Details.

  6. Repeat steps 3 to 5 for adding the scopes of all the DHCP Servers.

All the scopes of the added DHCP Servers along with their current available and used IP Address counts are retrieved and shown in the table below.

Top

DHCP Scope Monitor Settings

Schedule Monitoring of Scopes

  1. Click the Settings link to open the settings page.
  2. Select the Scheduler tab.
  3. Change the Status to Enabled

  4. Specify the interval to perform the scan:

    1. Daily - to update everyday. You need to specify the starting time.

    2. Weekly - to update on specific day(s) in a week. You need to specify the starting time and the day(s) on which the update should happen.

    3. Monthly - to update on a specific day every month(s). You need to specify starting time, select a day and select a month/months.

    4. Once Only - to run the tool only once at the scheduled time.

  5. Click Schedule to save the changes.

Configuring Email Alerts

Alerts are generated when the available address count in scope falls below the specified value.

  1. Click the Settings link to open the settings page.

  2. Select the Alert tab

  3. An email alert is generated when the available IP Addresses in a scope falls below 5. Specify a different value if required.

  4. Select the Enable Email Alert check box and specify the email addresses as comma separated values.

  5. Alert Cleanup Policy: Specify the maximum number of Alerts to be stored in the database, the default being 2000. When you delete the older alerts, you have an option to save them as a csv file for future reference.

  6. Click Save to save the changes.

Top

Viewing DHCP Scope Details

The Summary view provides the details of the DHCP Scopes of all the DHCP Servers that are being monitored with the following details:

To view the details of a specific DHCP Server, select the server from the combo box. To retrieve the current values, select the DHCP Server and click Refresh. Select All to view / refresh all the DHCP Servers.

 

To delete all the scopes of a DHCP Server, select the server and click Delete.

 

To export the scope details, select the DHCP Server and click Export and choose an appropriate format.

Top

 

Related Tools: IP Address Manager, Switch Port Mapper, DNS Resolver, System Snapshot

 

Copyright © 2004-2012, ZOHO Corp. All Rights Reserved.
ManageEngine