ping scan tool Ping Scan Tool                                            


 

Ping Scan utility of OpUtils software sweeps an entire range of IP Address to check their availability. The tool uses the basic PING function as a base to perform the sweep.

To check the connectivity status of a range of IP Addresses in a Network

  1. Click the Tools tab.

  2. Choose Ping Scan available under the Diagnostic Tools category.

  3. The input to the Ping Scan tool can be any or combination of the following:

    1. Add IP Range: Enter the Starting IP and Ending IP in the text field provided and click Add. The specified range gets added to the table below.

    2. Add IP List: Enter the IP Addresses as comma separated values and click Add. You can also specify a range like 192.168.113.1-10,192.168.21-20. The specified IP Addresses gets added to the table below.

    3. Import CSV: Browse to select a file containing comma separated IP Addresses and click Add. The IP Addresses gets added to the table below.

  4. To configure ICMP properties click Settings located at the top right corner or click Admin ->Settings. For details read the Configuring ICMP section.

  5. Click the Scan button.

  6. To delete an IP Address from the table. select and click Delete.

  7. Check the results. The results displayed include the Total IPs, Responding IPs, and Non Responding IPs. To view the details of each category click the respective hyperlink. The IP Address, DNS Name, Response Time, and the Status of the IP's are also displayed for all the above three categories. The icons and the status of the IP's are as follows:

             

                                                                                                                                     

       System up and running                      System not alive                   System does not exist  

 

Related Tools : SNMP Ping, DNS Resolver, MAC Address Resolver, System Snapshot.

 

Copyright © 2004-2012, ZOHO Corp. All Rights Reserved.
ManageEngine