OpManager: OpManager now supports monitoring of VeloCloud SD-WAN, enabling real-time tracking of controllers, tunnels, WAN links, and overall network health.
OpManager: OpManager now supports monitoring of Celona Private 5G enterprise networks, enabling real-time visibility into 5G access points, edge nodes, and connected devices.
OpManager Plus EE: The following new widgets are now supported: WLC, TopN Storage, SLA, SD-WAN, SDN, real-time, Nutanix, Meraki, capacity planning, VM, and process monitor widgets.
Monitors, Thresholds, and Alarm Suppression:
OpManager: Support for ">=" and "<=" threshold conditions is now available for Performance Monitors, Packet Loss, Response time, Service Monitors, and Script Monitors.
OpManager: Custom SNMP monitors now support new functional expressions such as Replace Using Regex, Remove N Chars from Start, Round Up, and Parse Number From String for advanced OID response processing.
OpManager: Added a new Custom Output Processor option in Custom SNMP monitors to define, customize, and interpret OID responses in addition to the existing functional expressions.
OpManager: Added support for monitoring SNMP tabular OIDs through Custom SNMP monitors, providing unified table views, interactive widgets, and detailed reports for correlating device metrics.
OpManager: Users can now suppress any type of monitor alarms in the workflow alarm suppression task.
Enterprise Central and ServiceDesk Plus Sync:
OpManager: OpManager now supports syncing downtime schedules from ServiceDesk Plus (on-premises) Change Requests, enabling unified and seamless planned maintenance across both platforms.
Enterprise Edition: OpManager now supports syncing relationships in Organization Map (Uplink Dependency, Virtualization, and ADDM modules) from central with ServiceDesk Plus Cloud.
Enterprise Edition: Users can now perform device and interface actions from the Central inventory page.
Enterprise Edition: Inventory actions have now been introduced in the Central server Quick Configuration Wizard to support bulk operations.
Network Insights and Flow Analysis:
OpManager: From now on, the Management IP will be automatically fetched from OpManager and updated in the Flow Analysis module during SNMP association with the NetFlow Analyzer devices.
OpManager: Introduced DHCP Insights for DHCP servers to provide real-time visibility into DHCP transactions, client activity, failures, and response performance using DPI-enabled packet analysis via the Remote Collector.
OpManager: Introduced DNS Insights for DNS servers to provide real-time visibility into DNS queries, response patterns, errors, and resolution performance using DPI-enabled packet analysis via the Remote Collector.
OpManager: Introduced an option to group application monitors for unified visibility.
OpManager : Introduced an ML-based Security Analytics module, aligned with the MITRE ATT&CK framework, in OpManager, OpManager Plus, OpManager Enterprise Edition and OpManager Plus Enterprise Edition.
General: From Version 128690, a new widget has been added to the Device Snapshot Page to display multiple interface IP addresses for SNMP-enabled devices.
OpUtils IPAM, DHCP, and Discovery:
OpUtils: Users can now discover the subnet and ARP from Arista devices using CLI-based discovery.
OpUtils: Under DHCP Servers, users can now add and monitor non-AD Microsoft DHCP Servers.
OpUtils: Added a new Discovery Source column under Subnet Details to help users identify how the subnet was discovered.
OpUtils: Introduced a new API (fvCEp) to collect end device MAC address from ACI switches.
OpUtils: IP Address Manager now supports Infoblox DHCP server monitoring and subnet discovery.
Enhancements
Alarm, Downtime, and Forecasting Enhancements:
OpManager: Users can now configure device downtime in bulk by uploading a CSV file containing IP addresses in the Device Downtime Scheduler.
OpManager: Default alarm rules have been refactored to support module-scoped configuration, allowing each rule to execute exclusively within its designated scope boundaries.
OpManager: The 'Suppress Alarms' configuration previously located under Monitor Settings → Hardware Sensor Metrics has migrated to 'Hardware Sensor Status → Default Alarm Rule for centralized control and consistency.
OpManager: The 'Alert on Hardware Change' configuration previously under Monitor Settings → Hardware Inventory Metrics has migrated into the Inventory Metrics' Default Alarm Rule Set for centralized control and consistency.
OpManager: New actions have been added to the Discovery Rule Engine, allowing users to suppress hardware sensors based on sensor name or sensor type.
OpManager: Introduced two new columns, Event Type and Previous Severity, in the Advanced Reports of the Alarms module. Both fields are also available as filter options for customized reporting.
OpManager: Forecast alerts now support Interface Rx and Tx utilization, along with their impact and recommendations in the Zia Insights dashboard.
OpManager: Custom field variables are now supported in the alarm messages.
OpManager: Alarm severity for F5 virtual servers or pool members can now be lowered using a database query.
Hardware and Device Monitoring Enhancements:
OpManager: Hardware monitoring support has now been introduced for HP Aruba switches.
OpManager: Switch Stack monitoring is now supported for HPE Aruba AOS-CX devices.
OpManager: Advanced Reports are now supported for Hardware Metrics.
OpManager : The getLastCollectedValues API has been enhanced to include properties like ThresholdEnabled, Interval, PollingStatus, and DisplayName, in addition to the existing performance monitor response, enabling a more comprehensive view of monitor configurations.
OpManager: A new option, Drop to Zero on Poll Failure, has been added under Graph Display Settings in Database Maintenance to drop the graph line to the baseline if polling fails, enabling visualization of poll failures.
Application Monitoring Enhancements:
OpManager: A new subtab "AppLogs" has been added under Applications tab, providing a centralized log monitoring capability in APM Plugin for collection, search, and analysis of application/server logs through a single dashboard.
OpManager: Henceforth, if the APM plug-in is enabled in OpManager, the user can add application monitors to the Business View in the Central server.
OpManager: Users can now view the application monitors associated with the servers in the Organization Map.
OpManager: Application groups are now supported in Alarm Correlation Rules.
OpManager: The Ember.js version used for the Reports and Applications tabs has been upgraded to 6.4.
Integrations and Audit Enhancements:
General: Support for ManageEngine Log360 integration has been introduced for NetFlow Analyzer and Firewall Analyzer. Users can now forward application audit and access logs to Log360.
General: Audit module events can now be forwarded to ManageEngine Log360.
OpManager: OpManager now supports syncing Wireless LAN Controller (WLC), Meraki, Cisco ACI, and SD-WAN relationships with ServiceDesk Plus On-Premises and ServiceDesk Plus Cloud.
OpManager: OpManager now syncs Switch Port Mapper relationships with ServiceDesk Plus Cloud.
General: Access control for the Jira Cloud “Log a Ticket” option has been enhanced. It is now accessible only to Super Admin users.
OpManager: The ‘Log a Ticket’ field names in Japanese for ServiceDesk Plus (on-premises) under OpManager Notification Profile, Notification Template, and Workflow have been updated to align with the corresponding field names in ServiceDesk Plus (on-premises).
Virtualization Enhancements:
OpManager: A new criteria field, "VirtualType" has been introduced for categorizing virtual devices when creating groups.
OpManager: Henceforth, VMware events will not be raised for VMs that are not monitored.
OpManager: VMware event severity classifications have been updated to include the Info level, in addition to the existing Attention, Trouble, and Clear categories.
OpManager: Introduced a Hypervisor Memory Utilization monitor for Nutanix VMs.
OpManager: vSan Inventory details can now be viewed on the vCenter Snapshot Page, when vSAN is available.
OpManager: Introduced a VMware VM Snapshot Details widget in the VMware vCenter device snapshot, under the Virtual Details tab, and in the datastore snapshot pages.
OpManager: OpManager now supports monitoring of VMware VM snapshots with real-time visibility into snapshot age and size. Users can also configure alerts based on age or size thresholds to manage snapshot growth and performance.
NCM and Compliance Enhancements:
NCM : Introduced a Bulk Remediation option in the policy result grid for violated rules.
NCM : Users can now stop an ongoing compliance check at any point during execution.
NCM : The selected remediation configlet content is now displayed under the corresponding flow rule violation item.
NCM : Vendor Name has been added as a field in the rule platform filter criteria. Additionally, Resource Name, IP Address, Serial Number, System Location, System Description, and System Contact have been added to the policy device criteria fields list.
NCM : Compliance checks triggered during backup will now be executed only when a configuration change is detected.
NCM: Now, the Velocity JAR has been upgraded from version 2.3 to 2.4.1.
NCM: In the Config Backup Schedule Report, a banner was not displayed for configuration-changed devices. A banner is now displayed.
NCM: Devices in the Config Backup Schedule Report are now sorted alphabetically.
NCM: In Export Configuration, support for the SMB protocol has been discontinued from the latest version.
NCM: Upgraded commons-vfs jar to version 2.10.0
NCM: The Ember.js version used for the Reports tab has been upgraded to 6.4.
Platform, Security, and Failover Enhancements:
General : PostgreSQL has been upgraded to version 14.22. The PostgreSQL vulnerability issues from 14.20 have been fixed now.
General : The Four-Node (DC-DR) Architecture for Failover has now been extended to Linux environment.
General : Introduced Preferred Master support for failover.
General : Apache Tomcat has been updated to enhance security.
General : Support for the Estonian language has been added.
OpUtils: Under security settings, file integrity support has been enhanced for OpUtils standalone.
OpManager: Integrated the dompurify npm package for secure client-side HTML rendering, ensuring safe data display in the UI and protection against Cross-Site Scripting (XSS) attacks.
General: PostgreSQL JDBC Driver has been upgraded to version 42.7.8, addressing and resolving the security vulnerabilities identified in version 42.7.3.
General : The MSSQL JDBC driver has been updated to enhance security.
Enterprise Central Configuration Enhancements:
Enterprise Edition: Device Down Settings and Interface Threshold Settings can now be configured using groups synced from OpManager Central.
OpUtils: In the central UI, the status of the subnet and switch scan (scanned, scanning in progress) updates automatically without refreshing the page.
Enterprise Edition: Interface Severity Settings feature has now been added to OpManager Central, allowing configurations to be pushed to selected or all probes to standardize configuration across enterprise environments.
Enterprise Edition: Device Down Settings can now be configured from OpManager Central and pushed to selected or all probes, ensuring consistent configuration across the enterprise environments.
OpUtils IPAM and Switch Port Mapper Enhancements:
OpUtils: Introduced a new API (/devices/{serialNumber}/clients) to collect end device MAC address from Cisco Meraki switches.
OpUtils: All MAC addresses associated with a trunk port can now be viewed in the export file.
OpUtils: In Switch Port Mapper and its All Inventory page, support has been added to apply search filters to exported data.
OpUtils: Rogue Detection will now display the device names as configured in the Switch Port Mapper tree view.
OpUtils: In Switch Port Mapper, the maximum length of the IfAlias field has been increased from 100 to 255 characters.
OpUtils: Introduced customizable port number and timeout fields for Fortinet, Palo Alto, and Cisco DHCP, along with router CLI credentials.
OpUtils: In Switch Port Manager, added a KB link on the Port Details page explaining why MAC addresses are not displayed for Cisco SNMP V3 switches.
OpUtils: In Router Details page, added a new column for Arp Count.
OpUtils: Duplex value is now also collected from the new OID .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14 for Huawei switches.
OpManager: The Monitoring Agents page under Settings in the ITOM Agents section now displays the agent’s current version along with the compatible agent versions.
OpManager: Previously, the To Email Address field in alarm escalation was limited to a total length of 150 characters. This limit has now been increased to 250 characters.
General : Apache Commons Text has been upgraded to version 1.15.0.
General : 7-Zip has been upgraded from version 24.09 to 25.01.
NetFlow : Support ID: 11004258 — Introduced a new option in the Reports Settings page to manage the visibility of percentile information.
Security Fixes
OpUtils: Previously, a stored XSS vulnerability was identified in Switch Port Mapper during the rendering of Switch Name, Interface Name, and VLAN Name. This issue has now been fixed. (ZVE-2026-0066, ZVE-2026-0204)
General : A Security Control Bypass vulnerability was identified in the Submit Query functionality due to improper query validation. This has now been fixed. (Reported by Fabius Watson).
OpUtils: Previously, Active Directory details added by an administrator could be accessed without authentication by users with IPAM access. This issue has been fixed now. (ZVE-2024-1132)
General: Previously, an unauthenticated TCP relay vulnerability was identified in SparkGateway (ZVE-2026-3290 Reported by Sus). This has now been rectified.
General: Previously, Operator users were able to delete shared dashboards due to an access control validation issue. This issue has now been fixed. (Reported by Sus.)
General: Due to security reasons, certain special characters has been restricted from Dashboard name during dashboard creation and update.
OpManager: Previously, an authenticated stored SQL injection vulnerability was identified in the Custom View feature (Reported by Sus). It has now been fixed.
OpManager: Previously, SQL Injection vulnerability was identified in NetFlow billing reports. This issue has been fixed now. (Reported by Tuannq. Refer ZVE-2026-4252).
OpManager: Previously, an authenticated Insecure Direct Object Reference (IDOR) vulnerability was identified in certain Load Balancer endpoints (Reported by Sus). This issue has now been fixed.
OpManager: From version 128734 onwards, Windows Monitoring Agents will use TLSv1.2 by default for all communication requests.
Enterprise Edition: Previously, an unauthorized path traversal vulnerability was identified in legacy Smart Update Manager on Probe installations. This issue has now been fixed. (Reported by qquynh)
NCM: Previously, there was a Server-Side Template Injection vulnerability (CVE-2026-12370) in Configlet processing that could potentially lead to remote code execution (RCE). This issue has now been fixed. (Reported by C&N)
NCM: ZVE-2026-4420: Previously, operator users could execute unapproved Configlets through the REST API. This issue has now been fixed. (Reported by qquynh).
Firewall: Previously, firewall names detected from syslog could cause a stored XSS vulnerability. This issue has now been fixed. (Reported by NGOC HIEU. Refer ZVE-2026-4258).
Firewall: Previously, an SQL injection vulnerability was identified in Rule Management Search Reports. This issue has now been fixed. (Reported by NGOC HIEU. Refer CVE-2026-14913).
Firewall: Previously, sensitive information was exposed on the Inventory interface list page. This issue has now been fixed. (Reported by ch4r0n. Refer ZVE-2026-4285).
Issue Fixes
General: A Remote Code Execution (RCE) vulnerability was identified in a third-party package and has been resolved.
General: In some cases, Log360 audit logs were not being forwarded after the service startup. This issue has now been resolved.
General: Previously, in rare scenarios, the upgrade process was halted due to a false health check failure caused by a case-sensitive comparison of the installation path. This issue has now been fixed.
General: Previously, Tomcat's default error page appeared instead of the application's custom error page when an invalid resource was accessed without a proper session. This issue has now been fixed.
General: The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on March 26, 2026.
General : The APNS certificate for iOS mobile application has been updated as the current APNS certificate will be expired on March 26, 2026.
General : Jakarta Mail jar has been upgraded to Version 2.0.5. The vulnerability issues from 2.0.3 have now been fixed.
General : Previously, in version 128665 and above, an Out of Memory (OOM) issue was observed in the QueryLogger component. This issue has now been fixed.
General : Previously, while saving or regenerating the embed widget link, the slide closed automatically. This issue has now been fixed.
General: Previously, there was an issue in ServiceDesk Plus and ServiceDesk MSP where request creation failed when the same devices were associated with multiple notification profiles with identical criteria. This issue has now been resolved.
General: Previously, Monitoring Agent re-association did not fully clear existing agent—device mappings, leading to mismatched monitored data. This has now been resolved.
General: Previously, from build 128524 onward, users were redirected to a blank page after session timeout due to an internal error. This issue has now been fixed.
General: Previously, probes could restart unexpectedly when the shared folder became temporarily unavailable. This has now been fixed.
General: Previously, from version 12.8.658, slowness was experienced on the Alarm page while filtering by Alarm Message. This issue has now been fixed.
General: Previously, when multiple devices had the same display name, only one device was listed in the global search results. This issue has now been fixed
General: Previously, AlarmsOne integration connectivity issues occurred when a large number of alarms were generated simultaneously. This issue has now been fixed.
OpManager: Previously, Out-of-Memory (OOM) errors occurred in rare cases, during VMware data collection for vSAN-related monitors. This issue has now been resolved.
OpManager: Previously, VMware Map caused OOM error in rare cases when being used in larger environments. This issue has been addressed by optimizing VMware Maps.
OpManager: Previously, high memory utilization issues were caused in vCenter in some cases of inventory update and data collection. This has now been optimized.
OpManager: Previously, for Huawei IPMI devices, the values of the memory sensors were not displayed. This issue has been fixed now.
OpManager: Out-of-Memory error occurred in a rare scenario during BGP data collection has been fixed now.
OpManager: An issue that caused failures during Downtime Schedule edit and delete operations in certain MSSQL database environments due to database constraint conflicts was observed. This issue has now been fixed.
OpManager: Previously, there was a startup issue in the APM Plugin due to an unsupported language sync from OpManager. This issue has now been fixed.
OpManager: Previously, an Out of Memory (OOM) issue occurred because BGP polling tasks would accumulate when SNMP responses were delayed. This has now been fixed.
OpManager: Previously, an ID discrepancy issue occurred when a database restore was performed in the Enterprise Edition. This issue has now been fixed.
OpManager : Previously, in the Notification Profiles Triggered report, selecting the Devices option under the Filter icon caused the UI to freeze when a large number of devices were present. This issue has now been fixed.
OpManager: Previously, when editing a scheduled Capacity Planning report, the selected rule filter, site filter, and renamed site were not retained in the generated report. This issue has now been fixed.
OpManager: Previously, an issue occurred in the Advanced Report while applying the Category filter for a long time. This issue has now been resolved.
OpManager: Previously, in the default report, changing the language to Japanese caused a UI alignment issue in the report header. This issue has now been fixed.
OpManager: Previously, while exporting the Advanced Report, the latitude and longitude values were rounded off in the exported file. This issue has now been fixed.
OpManager: Previously, from version 128595, there was an issue with displaying the Monitoring Forecast Trend for interface graphs. This issue has now been fixed.
OpManager: Previously, the Process monitor and Availability report were exported as .xls format instead of .xlsx format. This issue have been fixed now.
OpManager: Previously, groups containing subgroups were skipped from the 'Availability, Health and Alarms Summary' widget filters. This issue has been fixed now.
OpManager: Previously, the widgets in the VLAN snapshot page were duplicated due to an internal issue. This has now been fixed.
OpManager: Previously, in version 12.8.401, Performance Group data was not available in Advanced Reports. This has been fixed now.
OpManager: Previously, aggregate utilization statistics for discovered NetApp ONTAP devices were reported incorrectly. This has been fixed now.
OpManager: Previously, Business View users with access to multiple Business Views containing the same devices received an Unauthorized error in Report Builder. This has been fixed now.
OpManager: Previously, member switch information for Extreme Switch Stacks could not be retrieved due to an internal issue. This has now been resolved.
OpManager: Previously, false-positive alerts were generated for MAC address changes. This has now been resolved.
OpManager: Previously, certain VM entities were omitted during Xen Discovery. This has now been fixed.
OpManager: Previously, Proxmox Rediscovery failed in some cases due to storage volume and disk entities updating. This has now been fixed.
OpManager Storage Monitoring: Previously, there was an issue with the Dell EMC Data Domain storage template where the disk status did not match the actual state. This issue has now been fixed.
OpManager: Previously, F5 pool members or virtual servers were missing from the inventory when multiple entries had similar names or IP addresses. This issue has now been fixed.
OpManager: Previously, in certain scenarios, when new partition drives were discovered from the Device Template or Performance Monitor page, the monitoring interval was not updated correctly. This issue has been fixed.
OpManager: Previously, the Restart the service option in the Windows Service Monitor did not work properly when more than one service monitor was down during the same polling cycle. This issue has now been fixed.
OpManager: Previously, custom fields were being dissociated when searching for and associating a new field from the Custom Fields list view. This has been fixed now.
OpManager: Previously, expander details for discovered HPA devices were listed under the controller monitor instance. This has been fixed now.
OpManager: Previously, custom fields were not updated during CSV discovery for Switch, UPS, Printer, and Domain Controller device categories. This has now been fixed.
OpManager: From version 12.8.540, interface threshold failure alarms were transitioning between the configured severities even when the recorded value continued to violate the Critical threshold. This issue has now been fixed.
OpManager: The URL response delay observed from OpManager Version 128525 during 1-minute polling interval has been resolved.
OpManager: FortiGate WLC discovery failures caused by an internal issue have now been fixed.
OpManager: Rogue SSIDs were not persisted during WLC discovery due to a BCP utility issue. This has been fixed.
OpManager: Previously, hardware alerts were raised incorrectly for Brocade temperature sensors due to default threshold values. This issue has been fixed now.
OpManager: Previously, there was an issue in the table navigation icon in the Custom Alarm View. This has been fixed now.
OpManager: Previously, ServiceNow could not communicate with OpManager, even when the MID Server was configured in OpManager, for ServiceNow versions “Yokohama” and above due to a deprecated component in ServiceNow. This issue has now been resolved.
OpManager: From version 12.8.665, an issue in the "Run Program" and "Run System Command" notification profiles caused profile trigger failures. This issue has now been fixed.
OpManager MSP: Previously, the Monitoring Agent Down criterion was not displayed under Notification Profiles in MSP Central. This issue has now been fixed.
OpManager MSP: Previously, data synchronization between the Probe and Central was delayed as agent-related data was updating to Central every five minutes. This has now been fixed.
OpManager: Previously, Installed Software data collection failed on some Linux systems due to missing command dependencies, causing CLI session corruption. This issue has now been fixed.
OpManager: Previously, there was slowness in listing URL Monitors. This issue has now been fixed.
OpManager: Previously, IPMI dell iDrac 10 was not added to the product due to API incompatibility. This issue has been fixed now.
OpManager: Previously, in rare scenarios, when multiple VMs within a Nutanix cluster shared the same IP address, Device mapping conflicts occurred. This issue has now been resolved.
OpManager Storage Monitoring: Previously, the Synology spare disks were not categorized. This issue has now been fixed.
OpManager MSP: From build 128689, a snapshot loading issue was observed in MSP Central. This issue has now been fixed.
OpManager MSP: Previously, there was an issue in creating Business View when the "All probes" filter was selected. This issue has now been fixed.
OpManager: Previously, when the device was added as UnManaged via Rule Engine, Hardware monitoring was not suspended. This issue has been fixed now.
OpManager: From 128690, under LicenseManagement -> ManageUsage -> LiteDevices, the access points list was not displayed. This issue has now been resolved.
OpManager: Due to the EventLog Analyzer and Log360 products merge, an issue occurred in the OpManager-Log360 integration. This issue has now been fixed. For ManageEngine Log360 versions above 13000, OpManager version 128676 or later is required.
OpManager: Previously, the active process tab was not shown for devices with the parent category set to desktop. This issue has now been fixed.
OpManager: Previously, there was an issue fetching the model of HP Aruba devices on the Device Summary page. This issue has now been fixed.
OpManager: Previously, the hardware manufacturer was wrongly updated for Cisco devices, resulting in raising unnecessary alerts. This issue has been fixed now.
OpManager: Previously, when a parent device configured with uplink dependency went down, the child device displayed Downtime instead of Dependent Unavailable. This issue has now been fixed.
OpManager: Previously, NTLM Authentication for URL Monitoring was not working from OpManager Version 128525 due to a username format issue. This has been fixed now.
OpManager: Previously, URL Monitoring was not working for URLs with certain query parameters. This issue has been resolved.
OpManager: Previously, there was a redirection issue when navigating to the rack from the 3D Rack & Floor view. This issue has now been fixed.
OpManager: Previously, users with Read-Only scope were unable to access the Map view on the group snapshot page. This issue has now been fixed.
OpManager: Previously, when custom CLI commands were configured for CLI Performance Monitor through XML, polling occasionally started with the default command or skipped execution due to missing configured commands. This issue has now been fixed.
OpManager: Previously, unexpected crashes occurred during self-monitoring data collection when host network switching occurred in specific environments. This issue has now been fixed.
OpManager: Previously, Advanced Reports failed to generate when the Group By option was chosen. This issue has now been fixed.
OpManager: OpManager: Previously, from version 12.8.707, there was an issue with hardware sensor data collection for VMware ESX servers and IPMI devices monitored via REST API. This issue has been fixed now.
OpManager: Alarm processing in Central could be interrupted due to the internal alarm processing queue becoming blocked while processing alarms associated with Alarm Correlation Rules. This issue has been fixed.
OpManager: Previously, metric values for Cisco devices were displayed incorrectly when the chassis-associated OID instance returned an empty value. This issue has now been fixed.
OpManager: Previously, from 128665, there was a client issue where, after navigating from a device snapshot page to the inventory, device suppression was configured for the previously viewed device instead of the devices selected in the inventory. This issue has now been fixed.
OpManager: From version 128610, the "Select Groups" filter option was missing in the 'All Groups' widget. This issue has now been fixed.
OpManager: Previously, duplicate alarms were received for a device when creating a custom alarm view, if the device was present in more than one logical group or business view. This has now been fixed.
OpManager: Previously, Graphical Widget creation failed for the Interface Module in Custom Dashboards. This issue has now been fixed.
OpManager: Previously, the Y-axis in Interface Graphical Widgets, Report Builder, and NOC View did not display the appropriate units automatically. This issue has now been fixed.
OpManager: Previously, filtering the Advanced Report with performance monitors, using Value Types resulted in a report with no data. This issue has now been fixed.
OpManager: Previously, the end time was displayed incorrectly when an integrated report was exported with a custom time period. This issue has now been fixed.
OpManager: Previously, the exported PDF for the Server Health report did not display the start and end times when generated for a custom time period. This issue has now been fixed.
OpManager: Previously, newly added custom fields were not listed in the Groups and Interface Discovery modules. This issue has now been fixed.
OpManager: Previously, editing Advanced Reports failed in some cases in OpManager Plus Enterprise Edition. This issue has now been fixed.
OpManager: Previously, there was an issue in Capacity Planning Reports due to a database connection termination. This issue has now been fixed.
OpManager: Previously, in certain scenarios, VMware discovery and inventory updates encountered issues during virtual entity processing, especially when handling large numbers of VMs and virtual entities. This issue has now been fixed.
OpManager: Previously, alerts triggered for Hyper-V credential failures were not cleared after updating valid credentials. This issue has now been fixed.
OpManager: Previously, invalid system uptime values from vSphere resulted in incorrect device uptime reporting. This issue has now been fixed.
OpManager: Previously, in rare scenarios, the under-utilized and over-utilized VM widgets on the VM Sprawl dashboard and their corresponding Virtual Server reports displayed incorrect values. This issue has now been fixed.
OpManager: Previously, device status updates would fail due to delay in DNS resolution performed by the Dynamic IP Update Scheduler. This issue has now been fixed.
OpManager: Previously, interface status polling was not skipped when an interface traffic counter reset occurred. This issue has now been fixed.
OpManager: Previously, OpManager—APlus file synchronization failed due to archive failures. This issue has now been fixed.
OpManager: Interface status poll getting reverted during Interface rediscovery. This issue has been fixed now.
OpManager: Previously, in version 12.8.658, the Alarms widget did not display the details of APM plugin alarms correctly. This issue has now been fixed.
OpManager: Previously, hardware monitoring for Palo Alto Networks devices was affected from version 128330 due to an internal mapping issue. This issue has now been fixed.
OpManager: Previously, hardware monitoring data was not being collected for certain Check Point devices. This issue has now been resolved.
OpManager: Administrators authenticated through Active Directory (AD) under the NCM All Devices Scope were unable to access certain Network Configuration Manager (NCM) functionalities after login. This issue has now been resolved.
OpManager: Previously, under Advanced Reports, Traffic Flow Analysis metrics were incorrectly displayed under the WAN IP module. This issue has now been fixed.
OpManager: Previously, from version 128656, configured Downtime Schedulers with the Suppress Alarm type were not listed if the user who created them had been deleted. This issue has now been fixed.
OpManager: Previously, from version 128540, the Category filter in the Alarm Suppressed Devices default report was not functioning correctly. This issue has now been fixed.
OpManager: Previously, monitor failure alerts in the Data Collection Manager were triggered before reaching the configured number of consecutive failures due to incorrect failure count increment and reset behavior. This issue has now been fixed.
OpManager: Previously, the Monitors Health Summary widget displayed the Windows Service monitor status incorrectly. This issue has now been fixed.
OpManager: Previously, special characters in partition names prevented users from editing partition monitors due to restricted characters in the parameter. This issue has now been fixed.
OpManager: Previously, APM Plugin Monitor status updates failed due to a conflict during simultaneous update operations. This issue has now been fixed.
OpManager: previously, OOM issue occured when accessing the 'Meraki Organization Summary by Category' widget.This issue has now been fixed.
OpManager: From version 128582, Virtualization monitors could not be added for devices monitored by both the OpManager agent and Virtual APIs, from the Device Snapshot Page -> Monitors page or Settings -> Performance Monitors. This issue has now been fixed.
OpManager MSP: In MSP Central → Notification Profiles, devices from all customers were being displayed even after selecting a specific customer. This issue has now been fixed.
Enterprise Edition: During upgrades from builds earlier than 128581, the upgrade may fail on probe installations using a remote PostgreSQL database if Downtime Schedules were configured before the upgrade.
Enterprise Edition: Previously, in OpManager Plus Central and OpManager Lite Central, applying the Probe Name filter for a specific probe in Advanced Reports caused the report to fail to generate data for that probe. This issue has now been fixed.
Enterprise Edition: Previously, in OpManager Plus Central, renaming a probe caused issues in the Central dashboard and while exporting the Advanced Report. This issue has now been fixed.
Enterprise Edition: Previously, an internal issue in Switch Stack discovery caused stale entries to be created, resulting in synchronization issues. This issue has now been fixed.
Enterprise Edition: Previously, from version 128658, switching the probe in the Unified Console View (UCV) caused the APM List page to open automatically in a new tab when the dashboard contained APM-based a
Enterprise Edition: Previously, from version 12.8.554, in certain scenarios, when device templates were synchronized from the Central server to probes for the first time without any modifications, the thresholds associated with the monitors in the respective templates were inadvertently deleted. This issue has now been resolved.
Enterprise Edition: Previously, changes to device or interface properties in the Probe were reflected in criteria-based Groups in Central after a delay. This issue has now been fixed.
NetFlow : Support ID: 12447450 — The issue with custom time period selection via the traffic zoom graph in NetFlow Analyzer Enterprise Edition in Central has been fixed now.
NetFlow : Support ID: 12458525 — The issue affecting the Flow Rate graph (Support → System Performance → System Info → NFA Flow Rate Stats) has been fixed now.
NetFlow : The time zone mismatch issue in Trend and Compare reports has been fixed now.
NetFlow : Support ID: 12570512 — The Windows DHCP syslog parsing issue has been fixed now.
NetFlow : Support ID: 12518458 — The login timeout limitation for BCP has been fixed now with the introduction of a new system property.
NetFlow : Performance issue from version 128611 due to Raw Cleanup process has been fixed now.
NetFlow : Support ID: 12526212 — The probe and central server connection lost alert mail content has been updated.
NetFlow : The data loading issue in the device-src-network tab when Auto CIDR is enabled has been fixed now.
NetFlow: Support ID: 13455215 - Resolved an upgrade failure that occurred while registering the OpManager Probe due to a DNS name resolution issue in NetFlow Analyzer Enterprise Edition.
NetFlow : SupportID: 13453881,13431716 — Unable to proceed with the GUI upgrade when the License Agreement pop-up was blocked. This issue has now been fixed.
NCM: Previously, a stored XSS vulnerability was present in the Hostname field across the Device Snapshot, Enable Change Detection, Label Management Associate, Configuration Diff, Execute Configlet, Approval Request Details, Change Notification Associate, and Device SysOID Mapping pages. This issue has now been fixed.
NCM : Compliance formatter issues were observed across Inventory, Device Snapshot Overview, Device Snapshot Compliance tab, Network Status Report, and its PDF export. These issues have now been fixed.
NCM: In the Add Credential Rule page, the Custom Column Criteria field displayed default column names even after modification. It now correctly reflects the latest saved custom column names.
NCM: Previously, low-privilege users were able to delete regex entries created by other users during bulk deletion if the selection included a regex they had created. This issue has now been fixed.
NCM: Previously, users faced issues while navigating to the Configuration Snapshot page and deleting older configurations during cleanup when handling large configuration sizes. This issue has now been fixed.
OpUtils: Previously, an Out of Memory (OOM) issue occurred during the generation of scheduled Excel reports. This issue has now been fixed.
OpUtils: Previously, users with role-based access (Switch Port Mapper write permission only) were unable to modify Switch Port Mapper custom column values. This issue has now been fixed.
OpUtils: In Switch Port Mapper tree view, Cisco Meraki switches were added as duplicates when the same switch was already added using SNMP. This issue has now been fixed.
OpUtils: In Switch Port Mapper, there was an issue where duplicate MAC address alerts were triggered when a port was associated with multiple VLANs. This issue has now been fixed.
OpUtils: Previously, there was an issue where switch scanning was impacted due to IP history updates when MAC-to-IP mappings changed. This issue has now been fixed.
OpUtils: Previously, users with the Rogue-only role were unable to view the IP address and port details for MAC addresses in rogue detection. This issue has now been fixed.
OpUtils: Previously, there was an issue with the bulk update for switches. This issue has now been resolved.
OpUtils: Previously, subnetworks discovered through DHCP were not included under the corresponding supernet. This issue has now been resolved.
OpUtils: Previously, from version 12.8.656, the switch scan for SNMP v3 switches experienced a delay. This issue has now been fixed.
OpUtils: Previously, there was an issue with discovering subnets from the ipAddr Table of RFC1213-MIB. This issue has now been fixed.
OpUtils: Previously, there was a CLI timeout issue while fetching DHCP data from Fortinet devices due to incorrect pagination prompt handling in the CLI parser. This issue has now been fixed.
OpUtils: Previously, ARP collection for Cisco devices failed when CLI credentials included an enable username/password. This issue has now been fixed.
OpUtils: Previously, under IP Address Manager, in DHCP Servers tab, there was an issue with displaying the IP state for Cisco DHCP servers. This issue has now been fixed.
OpUtils: Previously, the Subnet Snapshot Summary page did not automatically update the subnet scan status after completion. This issue has now been fixed.
OpUtils: Previously, there was an issue that prevented IP address reservation on the Microsoft DHCP server. This issue has now been fixed.
OpUtils: Previously, in the IP Details page, there was an issue displaying the details of the logged-on users. This issue has now been resolved.
OpUtils: Previously, there was an issue with fetching DNS record data for record types other than A, AAAA, CNAME, PTR, MX, SOA, and NS. This issue has now been resolved.
OpUtils: Previously, users were unable to view all devices under Settings -> OpUtils -> Router page. This issue has now been fixed.
OpUtils: Previously, the Fortinet DHCP scan failed due to parsing of excluded IP addresses. This issue has now been fixed.
OpUtils: Previously, an Out of Memory (OOM) issue occurred while scanning DHCP server scopes containing a large number of IP addresses. This issue has now been fixed.
Firewall: User addition on the Central Server was failing from version 12.8.662 onwards. This issue has now been fixed.