# Wi-Fi

You can configure the Wi-Fi settings and configure protocol settings for Mac, Apple TV and iOS devices. For iOS 11.3 and above, the wi-fi sharing feature is restricted by default for the Wi-Fi distributed by Mobile Device Manager Plus.

To ease the Wi-Fi configuration process, you can add all the required Wi-Fi configurations to a single profile. This will ensure the device connects to any of the specified Wi-Fi networks when in it's vicinity. It also reduces the chances of the device being unmanaged, in case connection to Wi-Fi networks not distributed by MDM, is restricted. Using this profile, you can ensure managed Apple devices can easily connect to your enterprise's Wi-Fi network.

**Note:** Wi-Fi networks deployed through MDM on Apple devices cannot be removed or forgotten by end users.

## Policy Description

| PROFILE SPECIFICATION | DESCRIPTION |
|---|---|
| Wireless Network identification | Network identification |
| Connect to this Wi-Fi automatically | Automatically join this Wi-Fi network, on detection |
| Hidden network | Enable if target network is not broadcasting |
| MAC Address Randomization | Disabling this turns off the Private Address feature on devices running iOS/iPadOS 14 or above, to prevent them from using randomized MAC addresses while connecting to Wi-Fi networks |
| Security type | Wireless network encryption while connecting |
| Password | Password authentication to connect the Wi-Fi. **Note**: Passwords of Wi-Fi distributed from MDM will be hidden in iOS devices. |
| Configure Protocol (Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any (Enterprise)) |  |
| Protocols Supported | Choose the type of protocol. Supported protocols include **TLS, LEAP, EAP-FAST, TTLS, PEAP, EAP-SIM** and **EAP-AKA**. |
| Use Protected Access Credential | Enabling protected access |
| Provision Protected Access Credential | Allow protected access |
| Provision PAC anonymously | Enabling PAC anonymously |
| Authentication Protocol (Can be configured only if Protocol Supported is TTLS) | Select the Authentication Protocol to be used |
| Configure Authentication (Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any (Enterprise)) |  |
| User Name | User Name of the device, (%username%) will get the appropriate User Name, mapped to the device |
| Use per connection Password | User password for initial connection |
| Identity Certificate (Can be configured only if Protocol Supported is TLS/EAP-FAST/TTLS/PEAP) | Specify the certificate to be used for Client-based authentication. [SCEP](https://www.manageengine.com/mobile-device-management/help/profile_management/ios/mdm_scep.html) certificates can also be utilized for this. |
| Externally Visible Identification | Visible identification |
| Certificate | Specify the CA certificate to be used. |
| Trusted Certificate (Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any (Enterprise)) |  |
| Configure Proxy |  |
| Proxy Settings | Manual or Automatic |

## Dynamic Variables

The below mentioned dynamic variables are retrieved from the data that has been provided while enrolling the device.

%username% - will get the appropriate user name, mapped to the device