OpManager Plus System Requirements 

The system requirements mentioned below are minimum requirements for the specified number of devices. The sizing requirements may vary based on the load.

Hardware requirements

 
OpManager Plus Standard Edition
 
OpManager Plus Enterprise Edition

Note : 

  • CPU recommendation for deployments use the ®PassMark score. To learn more, click here.
  • The above is the primary requirement for OpManager Plus. For additional system requirements for each module, check the corresponding modules below
  • Dedicated resources must be available in the case of VMs
  • We strongly recommend assigning a dedicated machine for OpManager Plus central and each probes.
 
Network Configuration Manager
 
NetFlow Analyzer
 
Firewall Analyzer
 
IP Address & Switch Port Management (OpUtils)

We strongly recommend assigning a dedicated machine for OpManager.

Software Requirements

The following table lists the recommended software requirements for an OpManager Plus installation.

Software 

Versions requirements for Evaluation 

Version requirements for Production 

 Windows OS

Windows 10, Windows 11 (or) Windows Server 2012

Windows Server 2022/ 2019/ 2016/ 2012 R2/ 2012

 Linux OS

Ubuntu 14 to 20.04/ CentOS 7/ Fedora 37/ Red Hat 7 to 9.4/ Opensuse 15.4/ Debian 10 to 11.5​

​Ubuntu 14 to 20.04/ Red Hat version 7 to 9.4/ CentOS Stream 8/ CentOS 7/ CentOS Stream 9

 Browsers

Chrome/ Firefox/ Edge

Chrome (preferred)/ Firefox/ Edge

User Privilege: Local administrator privileges required for OpManager Plus installation.

Port Requirements

The following table summarizes the ports and protocols that OpManager Plus uses for communication.

 
Ports used by the application
 
Ports used for monitoring
 
Ports used by add-ons
 
Databases

Note: To learn more about changing port numbers, click here

Database Requirements

The following table lists the basic requirements for your OpManager Plus database server.

PostgreSQL

Comes bundled with the product (PostgreSQL version 14.7).

For Remote PostgreSQL, OpManager Plus supports PostgreSQL versions 14.7 to 14.x. 

In case of failover, please use MS SQL.

Microsoft SQL

1. Supported versions:

SQL 2019 (from build 125379) | SQL 2017 | SQL 2016 | SQL 2014

2. Important Notices:

1. For production use 64 bit versions of SQL
2. Recovery mode should be set to SIMPLE.
3. SQL and OpManager Plus should be in the same LAN. Currently WAN based SQL installations are not supported.
4. Developer edition of SQL Server is not supported.

3. Collation:

    • English with collation setting (SQL_Latin1_General_CP1_CI_AS)
    • Norwegian with collation setting (Danish_Norwegian_CI_AS)
    • Simplified Chinese with collation setting (Chinese_PRC_CI_AS)
    • Japanese with collation setting (Japanese_CI_AS)
    • German with collation setting (German_PhoneBook_CI_AS)

4. Authentication:

Mixed mode (MSSQL and Windows Authentication).

5. BCP:

The "bcp.exe" and "bcp.rll" must be available in the OpManager bin directory. 

The BCP utility provided with Microsoft SQL Server is a command line utility that allows you to import and export large amounts of data in and out of SQL server databases quickly. The bcp.exe and bcp.rll will be available in the MSSQL installation directory. If MSSQL is in a remote machine, copy bcp.exe and bcp.rll files and paste them in the <\OpManager\bin> directory.

The SQL server version compliant with the SQL Native Client must be installed in the same Server.

6. User-role requirement:

Server roles - "dbcreator", "public" and "sysadmin".

User Mapping - Map this login to "master" with database role ownership as "db_owner" and "public". Click here to learn more.

List of Ports to be opened in Firewall

For device discovery
  • OpManager Plus uses ICMP protocol (which has no TCP/UDP ports) by default during device discovery.
  • Associate credentials during discovery for proper classification of devices and data collection. Refer below for the default ports used for each protocol.

For data collection and monitoring of devices

Open the below ports in the firewall to ensure uninterrupted monitoring of your devices.
  • WMI - 5000-6000 and 49152-65535(TCP) - Bidirectional
  • WMI - 135(TCP) - Inbound
  • SNMP-161(UDP) - Bidirectional
  • SNMP Traps- 162(UDP)- Unidirectional (From monitored device to OpManager Plus server)
  • Telnet- 23(TCP)- Bidirectional
  • SSH- 22(TCP)- Bidirectional
  • ICMP- Used to check the availability status and to add a device. - Bidirectional
  • Default syslog port 514(UDP)- Unidirectional (From monitored device to OpManager Plus server)
Note: OpManager Plus uses ICMP for its initial discovery of devices. If your device does not support ICMP, discovering it via 'Discovery Profile' is not possible. You will only be able to discover the device through 'Add Device' or 'CSV file' options.
 

Ports used by Applications Manager plugin

The following are the ports used by Applications Manager plugin:

  • HTTP - 9090
  • HTTPS - 8443

The SQL server version compliant with the SQL Native Client must be installed in the same Server.

General Information

Antivirus scanners interfering with database files may affect normal functioning of the database. Please make sure that your anti-virus scanners do not affect the functioning of the product/database.

 

 
 Pricing  Get Quote