How to download and deploy Windows 10 version 1903 updates?

1. Before deployment, run through the Compatibility Check available under the Important Notes section to find if you meet all the minimum requirements that impact upgradeability.
2. Ensure that the feature pack option is enabled under Patch Database Settings.
   • In Patch Manager Plus: Patch Mgmt → Settings → Patch Database Settings → Windows tab → enable the Feature Pack option.
   • In Patch Manager Plus: Admin → Settings → Patch Database Settings → Windows tab → enable the Feature Pack option.
3. Ensure that you have not declined the feature pack updates under the Decline Patches section.
4. Microsoft recommends upgrading to the latest version, Windows 10 1909. You can upgrade directly to Windows 10, version 1909 from your existing version of Windows 10 — you do not need to deploy any versions in between.

Follow the steps below to download the ISO image:

1. Download the Windows 10 1903 ISO file from the Volume Licensing Service Center.
2. If you're using PMP Build Version 10.1.2228.6 and above:
   • You'll find an option to upload near the Download failed error message. Use Upload to install this patch.
   • Otherwise, navigate to Patches → Downloaded Patches and search for the required patches. Once found, upload the patches via Upload Patches and click Install Patch.
3. If you're using DC Build Version 10.1.2228.6 and above:
   • You'll find an option to upload near the Download failed error message. Use Upload to install this patch.
   • Otherwise, navigate to Patch Mgmt → Patches → Downloaded Patches and search for the required patches. Once found, upload the patches via Upload Patches and click Install Patch.

If you're using PMP Build Version below 10.1.2228.6 and DC Build Version below 10.1.2228.6:

1. Download the Windows 10 1903 ISO file from the Volume Licensing Service Center.
2. Navigate to the patch store location in Endpoint Central: Patch Management → Downloaded Patches → Settings → Patch Repository Location.
3. In Patch Manager Plus: Patches → Downloaded Patches → Settings → Patch Repository Location.
4. In Vulnerability Manager Plus: Patches → Downloaded Patches → Settings → Patch Repository Location.
5. Copy the downloaded ISO file manually into the patch store directory and rename it:
   Language-English:
   • 32 Bit: 106988-Win10_1903_en_enterprisex32.iso
   • 64 Bit: 106984-Win10_1903_en_enterprisex64.iso
   Note

   The above naming convention is applicable only for the Windows 10 1903 Enterprise edition.

Endpoint Central, Patch Manager Plus, and Vulnerability Manager Plus support the deployment of feature packs for multiple languages.

For Endpoint Central build version 10.0.319 and above

1. The ISO file download is automated in Endpoint Central build version 10.0.319 and above (except for the Windows 10 1903 Enterprise edition). Follow the steps here to enable the automatic download of the ISO image.
2. After enabling, proceed directly to the feature pack deployment step.

For Endpoint Central build version below 10.0.319

1. Download the Windows 10 1903 ISO file from the Volume Licensing Service Center or from here.
2. Navigate to the patch store location: Admin → Patch Settings → Clean Up Settings → Patch Repository Location.
3. Copy the downloaded ISO file manually into the patch store directory and rename it:
   Language - English
   • 32 Bit: 106986-Win10_1903_enx32.iso
   • 64 Bit: 106982-Win10_1903_enx64.iso
   Note

   The above naming convention is not applicable for the Windows 10 1903 Enterprise edition.

Patch Manager Plus supports the deployment of feature packs for multiple languages. Click here to view the ISO setup file for the language of your choice.

For Patch Manager Plus build version 10.0.327 and above

1. The ISO file download is automated in Patch Manager Plus build version 10.0.327 and above (except for the Windows 10 1903 Enterprise edition). Follow the steps here to enable the automatic download of the ISO image.
2. After enabling, proceed directly to the feature pack deployment step.

For Patch Manager Plus build version below 10.0.327

1. Download the Windows 10 1903 ISO file from the Volume Licensing Service Center or from here.
2. Navigate to the patch store location: Admin → Patch Settings → Clean Up Settings → Patch Repository Location.
3. Copy the downloaded ISO file manually into the patch store directory and rename it:
   Language-English:
   • 32 Bit: 106986-Win10_1903_enx32.iso
   • 64 Bit: 106982-Win10_1903_enx64.iso
   Note

   The above naming convention is not applicable for the Windows 10 1903 Enterprise edition. See Windows 10 1903 Enterprise and Professional Edition above to see how the ISO image download for that edition is handled.

Patch Manager Plus supports the deployment of feature packs for multiple languages. Click here to view the ISO setup file for the language of your choice.

For Vulnerability Manager Plus

1. The ISO file download is automated in Vulnerability Manager Plus (except for the Windows 10 1903 Enterprise edition). Follow the steps here to enable the automatic download of the ISO image.
2. After enabling, proceed directly to the feature pack deployment step.

1. In the server web console, navigate to the Missing Patches view.
2. Choose the Windows 10 1903 feature pack patches you wish to deploy.

Patch ID details:

• 106989 - Windows 10 1903 Enterprise Edition - 32 Bit
• 106985 - Windows 10 1903 Enterprise Edition - 64 Bit
• 106987 - Other Windows 10 1903 Editions - 32 Bit
• 106983 - Other Windows 10 1903 Editions - 64 Bit
• Click Install Patch to deploy them.

1. To create an APD task for deploying feature packs, make sure to select the feature pack check box while defining the patch task.
2. Once the dependency patch is downloaded and stored in the Patch Store, "Feature Packs" will be successfully deployed to the target computers during the subsequent deployment window. A separate configuration can be created for the particular patch on demand.

Download and deployment of Windows 10 feature pack is supported only in Patch Manager Plus build versions 10.0.147 and above.

You can enable the Feature Pack option by clicking on Admin → Settings → Patch Database Settings, then clicking on the Windows tab and enabling the Feature Pack option.

Patch Manager Plus supports the deployment of Windows 10 1903 feature packs in 28 languages.

You can deploy Windows 10 feature packs in more than one language by checking the respective ISO files for each language, then downloading and placing them in the patch store.