Adding devices through CSV file 

 To add devices using .csv file, follow the steps given below

  1. Click settings-> Discovery -> Discovery profile .
  2. Under 'discovery-input' select CSV file import.
  3. Browse and upload the CSV file.
  4. Configure feilds from CSV file by setting the 'device name/ IP' , 'display name' and 'device type', click 'ok'.
  5. Select the required credentials and click 'ok'.
  6. Add 'discovery rules' and click 'ok'.
  7. You can either 'enable' or 'disable' interface. If enabled, in the 'discovery-interface' select the 'interface-type', 'admin-status' ,'operational-status' and click 'ok'.
  8. Set the 'discovery-schedule' and click 'Next'
  9. Click 'Execute now' and the device discovery process starts.
Video Zone
OpManager Customer Videos
Altaleb Alshenqiti - Ministry of National Guard - Health Affairs
  
  •  IT Admin from "Royal flying doctor service", Australia
     Jonathan ManageEngine Customer
  •  Michael - Network & Tech, ManageEngine Customer
     Altaleb Alshenqiti - Ministry of National Guard - Health Affairs
  •  David Tremont, Associate Directory of Infrastructure,USA
     Todd Haverstock Administrative Director
  •  Donald Stewart, IT Manager from Crest Industries
     John Rosser, MIS Manager - Yale Chase Equipment & Services
 Pricing  Get Quote