Monitoring and Management of RAIDs in OpManager

Heterogeneous management tool for storage area networks

ManageEngine® OpManager uses SNMP / CLI / SMI-S/ vendor-specific APIs to discover the RAIDs in your network. Complete set of asset, capacity, performance, and configuration information of the RAID and its components are discovered and represented in the OpManager client.

RAIDs Supported

  • Areca ARC
  • DELL EqualLogic
  • DELL MD 3000 / 3000i
  • EMC Centera
  • EMC Symmetrix
  • Fibrenetix
  • Hitachi Lightning
  • Hitachi TagmaStore
  • Hitachi Thunder
  • HP 3PAR
  • HP EVA
  • HP MSA 1000/1500
  • HP MSA 2000/2312
  • Huawei OceanStor
  • IBM DS6000 / DS8000
  • IBM FastT / DS4000 / DS5000
  • IBM N Series
  • IBM Storwize V7000
  • Infortrend
  • NetApp
  • Promise VTrak
  • StorageTek/LSI Logic
  • SUN StorEdge
  • Unistar Teravault
Set thresholds for your device's critical performance metrics and proactively monitor your RAID storage.
Get a personalised demo on OpManager from our technical experts to know how.

Features supported

Physical Assets Logical Assets Monitors Report Details
  • Controller
  • Controller Fabric Ports
  • Disk Drives
  • Interconnect Details
  • LUNs
  • Volumes
  • Raid Groups
  • Virtual Disk Groups
  • Partitions
  • Volume Groups
  • Controller status
  • Controller port status
  • Disk Drive status
  • Volume status
  • Disk Group status
  • LUN status
  • Raid Capacity summary
  • Availability Trends
  • Top N Availability
  • Array statistics
  • LUN statistics
  • Disk Drive statistics
  • VDisk statistics
  • Top N Performance
  • Location summary


Asset Management

RAID Assets 

  • Up-to-date device summary
  • Administrators can key in details such as device location, vendor details, and technical support info.
  • Comprehensive physical and logical asset details in RAIDs
  • Device level problem report filing and maintenance

Fault Management

RAID Alarms 

OpManager periodically polls the devices to check the health, availabiity, and utilization of storage RAIDs. Early indications are provided on hardware/software problems and alarms are generated on drive failures, sensor faults such as Fan Failure, Battery Failure, Power supply failure. SNMP traps from the arrays are also captured and appropriate alarm is generated.

  • Captures Storage Array & Component Status Change Notifications
  • Management functions such as assign owner, annotate, clear, and delete
  • Reports alarms to administrators through email or SMS messages based on customizable rules
  • Escalates unattended alarms to higher ups based on pre-defined rules

Availability Trends

RAID Availability 

Availability reports on RAID controllers and its ports show the availability trends, downtime history, MTTR, MTBF, etc

You can generate the reports for various time periods such as today, yesterday, last N days, last week, this month, last month, and between two selected days

Performance Reports

RAID Controller Reports 

Performance statistics are computed at periodic intervals and reports generated to provide trend analysis for the storage array components like

  • Storage Array Capacity
  • Storage Array
  • Controller / Storage Processor
  • Virtual Disks
  • Raid Groups
  • Disk Groups
  • Disk Drives
  • Controller Port Statistics

The parameters collected include the following ,

  • Traffic - Read / Write / Total
  • Utilization - Read / Write / Total
  • Bandwidth - Read / Write / Total
  • Throughput - Read / Write / Total
  • Latency - Read / Write
  • Queue Depth
  • Storage array capacity - Total / Configured / Used / Free

You can visually see the utilization of components like LUN volumes and take preventive measures as they reach their peak capacities


RAID Map View 

  • Topological map shows arrays and their connections to switches and host servers.
  • Link details table shows link name, source, and destination.
  • Color-coded icons depict switch and interconnection status.
  • Drill-down views - Array Sub-map views
Video Zone
OpManager Customer Videos
Altaleb Alshenqiti - Ministry of National Guard - Health Affairs
  •  IT Admin from "Royal flying doctor service", Australia
     Jonathan ManageEngine Customer
  •  Michael - Network & Tech, ManageEngine Customer
     Altaleb Alshenqiti - Ministry of National Guard - Health Affairs
  •  David Tremont, Associate Directory of Infrastructure,USA
     Todd Haverstock Administrative Director
  •  Donald Stewart, IT Manager from Crest Industries
     John Rosser, MIS Manager - Yale Chase Equipment & Services
 Pricing  Get Quote