OpUtils

-

Switch Port & IP Address Management Software

Wake On LAN Tool

Boot Machines from Remote

wake-on-lan  

Wake on LAN tool remotely 'wakes-up' a machine (boots-up a machine) that is present in the network but not alive. For this tool to work, the machine should be configured to accept the Wake-on-LAN remote command. The Wake on LAN tool supports both manual and scheduled waking up of systems. It can be used to boot systems accross VLANs.

 

Wake On LAN Features

  • Supports both manual and scheduled wakeup
  • Automatic discovery of MAC Addresses of the systems in the network.
  • Create multiple groups of computers as different tasks and schedule them separately.
  • Ability to boot systems accross VLANs.
  • Provides summary of the various tasks along with the status of execution.
  • Detailed status of individual computers in different groups.

 

On Demand Wake-up

The Wake on LAN tool enables waking up machines on demand from remote. The tool can be used to wake-up either a single machine or multiple machines simultaneously. The administrator has an option to send the Wake on LAN packets to the specific system or broadcast the WOL packets in the whole subnets. The status and the last wake on time is updated the database.

 

Scheduled Wake-up

The Wake on LAN tool can be scheduled to run at a specified interval. The administrators can add all the systems to be woken-up and schedule the tool to run at a specified interval - Daily, Monthly, or Yearly. The Wake on LAN tool, at the specified time, sends the Wake on LAN packets to the systems to boot them up.

 

Group-Based Scheduling

The Wake on LAN tool allows administrators to create multiple groups containing different computers. These groups can be scheduled to run at different times. There is no restriction to the number of groups that can be created. The status of individual tasks will be provided as a summary. Status of individual computers will also be available in the task details view.

 

Wake on LAN Requirements

For the Wake on LAN to work, the machines should meet the following requirements:

  • An ATX motherboard with 3-pin Wake on LAN connector.
  • An ATX power supply meeting the ATX 2.01 specifications.
  • A network card (NIC) that supports Wake on LAN.
  • Wake on LAN should be enabled in the BIOS power Management.

For more details, refer to the Wake on LAN topic in the online help. Refer to Wake on LAN Knowledge Base for troubleshooting tips.