Let's assume that your IT help desk frequently receives tickets from end users reporting a synchronization failure of Outlook with mobile mail client. Your technicians have analyzed the issue and provided the steps to resolve this. They have also included the resolution steps in a document, put it on your website's troubleshooting section, and added it in the application's knowledge base as well. However, your IT help desk receives similar tickets frequently and the technicians are tired of providing the same resolution again and again.
Does this situation sound familiar? The problem is universal. No matter how good or informative your knowledge base is, it is always hard to convince end users to check the knowledge base prior to raising tickets.
Here's how ServiceDesk Plus helps you to avoid creation of such tickets using 'Solution Auto Suggest' feature.
When a user creates a new ticket (incident) using a template through self-service portal, solution articles from knowledge base and announcements are automatically suggested to the user.
To enable this feature,
Go to Admin -> Self-service portal settings -> enable 'Show suggestions to requesters while creating a new incident request' option
Solution auto suggest,
Lets imagine your IT help desk receives complaints from multiple users of a particular department regarding intermittent network connection. Your technicians have found the root cause to be a faulty router that has to be replaced. Then, a technician creates a new change request, which in the first place has to be authorized by the change manager. Let's say that Heather Graham is the change manager for all the network related changes in your organization. Heather is not automatically notified about the creation of this change. Also the technician is unaware of this fact and blindly waits for an approval from the change manager. This lack of visibility leads to delayed assistance to the end users that eventually drove multiple users to report the same issue resulting in unnecessary chaos.
If you had faced similar issues in the past, then here's your solution
ServiceDesk Plus lets you to pre-configure a change manager to the changes based on category and template. This automatically populates and notifies a change manager when you create a change so that he/she can act quickly on the RFC.
Category based assignment:
To configure, go to Admin -> Helpdesk Customizer -> Category (choose and edit a category) -> Assign change manager.
Template based assignment:
To configure, go to Admin -> Change Template -> Choose and Edit a template -> Assign change manager
Let's continue the scenario from the last snippet. Let's assume that Heather Graham, the change manager, who is responsible for network related changes is on a vacation and is not available for a week. Meanwhile, the change owner has come up with a roll out plan and the RFC needs an approval in the 'Planning' stage. By now, the intermittent network connectivity issue is a growing concern and it is not possible to wait until Heather gets back. In this case, here's the best way to move forward with this change,
Advise your change approver to co-ordinate with the change owner and approve the change
To assign a change approver,
Go to Change -> Choose a particular change -> Under the roles section, assign one or more change approvers.
Your IT help desk most likely sees a lot of we need it now tickets. These tickets could be from an entry-level staff, mid-level executives, or even the upper management. In such scenarios, you will definitely need to prioritize the tickets.
Let's say, the CEO of an organization requests access to a business analytic tool to gather data. And an entry-level employee raises the same request. Clearly, you will need some form of prioritization in this case.
So how do you prioritize tickets based on end users? Here's how you can do it easily using ServiceDesk Plus.
Classify and configure end users as VIP users based on their positions such as directors, vice presidents, managers, administrators, and so on. When a VIP user reports an incident or raises a service request, an icon identifying the user as a VIP appears next to the person's name. This will enable the technician to prioritize the ticket easily.
To configure an end user as a VIP user,
Go to Admin -> Requesters (under user's section) -> Choose and edit a requester -> Enable the VIP user check box.
A VIP icon that indicates a VIP user:
Classify users as VIPs to,
Every day when you log into the ServiceDesk Plus application, it's not a pleasant sight to see spam or promotional mails saying, "automatic reply", "mailer daemon", "best buy Arazon" etc. crowding your inbox. This can be particularly frustrating on Monday mornings that set the stage for the week ahead.
Trashing out these emails can eat an hour or two of your technicians' valuable time every day. Furthermore, with SLA timers ticking across tickets, eliminating these emails can take your technicians' focus away from other higher priority issues that need immediate attention.
During such times, here is how you can smartly prevent junk emails from entering into ServiceDesk Plus and save your technicians' time and energy.
Classify users as VIPs to,
Imagine a new employee joins your organization. The HR executive creates a service request for the 'new joinee' process. While filling the service request, the HR executive does not provide the specifics of the devices to be provided, privileges for the new employee, soft ware products that he needs etc. This partly filled service request is not sufficient for a technician to provide the required services to the user. The technician sends out multiple emails to various people involved to figure out the exact services to be provided. Let's assume that one of such person provides the wrong information to the technician. This results in incorrect service delivery, unnecessary confusion, waiting time, and most importantly, a delay in desired service delivery.
Does that sound familiar to you?
If yes, ServiceDesk Plus lets you to resolve this issue with a simple logic. Ideally, the new employee's reporting manager is the right person to suggest the above mentioned information.
Therefore, we recommend that you assign a person as an editor in ServiceDesk Plus to validate such requests and avoid making some costly mistakes. The editor cross checks the service request created by a user and ensures precision and clarity before a technician starts working on the service request.
The editor can be added to your service request templates as shown below:
Admin -> Service Catalog -> Choose a template -> Drag and drop the editor field into the template from the left pane.
The editor is notified about the service request in his self service portal (My Requests Summary section) as shown below:
Similarly, the IT technicians and the user who creates the service request are also notified.
Assign an editor to service requests that you consider as business critical. A few service requests that might need a double-check are as listed below:
Your IT help desk receives a myriad of service requests every day, but some of them could be invalid for various reasons. Let's assume that a user from the payroll department unwittingly requests for a design soft ware. When this service request reaches the IT help desk, the technician has to validate the request before he proceeds any further. He has to check if the user really needs the soft ware.
Why waste your technician's time when you can hand over this responsibility to someone like a service request approver?
A service request approver is a person (usually the head of department ) who approves the service requests arising from his department or site. As an IT administrator, you can implement this simple, yet necessary process in two steps,
Assign Users as Service Request Approvers:
To assign a user,
Go to Admin -> Requesters (Under users section) -> Choose a requester -> Enable Service Request Approver option.
Add the Approver Field in the Service Request Template:
To add the approver field in the service request template,
Go to Admin -> Service Catalog -> Choose the service category -> Choose a template -> drag and drop the "select approvers" field -> Save the template.
Let's assume a new employee joins your organization. The department head raises a service request to provide the devices and accounts to the new employee, without critical details such as the specifications and the privilege limits of the employee. The technician, in turn, sends multiple emails to the department head to find out the exact model of the device , specifications, soft ware to be provided, access permissions, etc.
Wouldn't it be a lot easier if the requester provides all the necessary details at the time of creating the service request?
Using ServiceDesk Plus, you can eliminate this issue easily, provide prompt service, and save time for your end users as well as technicians. Add resources to a service request template to narrow down the user's requirement and to avoid unnecessary email iterations. Resources are a set of questions that help the technicians to understand the exact requirement from the service requester. Below is a sample resource section of a service request,
To add the resources to a service template,
Go to Admin -> Service catalog -> choose a service category -> choose and edit a template -> add resource.
Implementing this process helps you to,
Let's imagine it's a Sunday aft ernoon and the monitoring device in your network identifies a security violation on the application server. The device sends out an alert to the help desk and creates a ticket. You have a specialized technician group to handle with such security incidents. However, your technicians might miss the ticket as it was created during a holiday. And when the technicians' notice the ticket on the next working day, it might be late already.
Here are two simple processes that will help you manage such situations using ServiceDesk Plus.
Create a business rule that should be executed anytime.
Go to Admin -> Business Rules (Helpdesk section) -> Add new business rule or choose an existing business rule -> Configure as follows
Notify the technicians through email and sms.
Implementing the above processes will help you to,
Let's imagine there is going to be a planned network maintenance activity in one of the branches of your organization, lets say New York. The users in the New York branch alone are to be notified about the planned network downtime. If you make this announcement to the entire organization, instead of the users in the respective branch, it might create unnecessary chaos. Let's also, imagine that certain services are specific to only few users. For e.g. access to payroll server, database, active directory administrator privilege etc. If you do not restrict these services to these users, then there is greater possibility that your IT help desk receives many unwanted and incorrect tickets.
The above mentioned two critical issues can be easily avoided with ServiceDesk Plus. Organize your users into groups based on certain criteria.
To categorize the users,
Go to Admin -> User Groups (under 'Users' section) -> Add User Group. Given below is a sample user group,
Organize your users into groups to,
Let's imagine its a month end and a user from the payroll team is unable to login to the payroll application. He sends an email to the IT help desk to fix the problem at the earliest which is created as a ticket. The help desk coordinator is unavailable and the ticket lies in an unassigned state until the help desk administrator assigns the ticket to the concerned technician. Meanwhile, the aff ected user loses his patience and repeatedly calls or emails the help desk team leading to more number of tickets. Now wouldn't it be good to assign the corresponding technician automatically as soon as a ticket is created in the help desk?
ServiceDesk Plus lets you to do just that - assign the correct technician automatically to a ticket in three ways as follows,
Category based technician assignment:
Go to Admin -> Help desk Customizer (under help desk section) -> Choose a catogory -> Assign a technician.
Therefore, when a user chooses a category while creating the ticket, the technician is automatically assigned.
Assign technician through business rule:
Assign a technician to a ticket based on pre-defined criteria or rule set.
Go to Admin -> Business Rules (under help desk section) -> Choose a rule or create a new rule -> Specify the criteria and set the actions.
Template based technician assignment:
To configure technician in the incident template,
Go to Admin -> Incident Templates (Under help desk section) -> Choose a template -> Select a technician from the drop down -> Save the template.
Similarly, you can assign a technician to a service template through service catalog.
By assigning the right technicians automatically
Let's imagine that a very important person (VIP) in your organization urgently requests a piece of information from the IT help desk. Your IT help desk has only three technicians who are allowed to query the Oracle database and fetch the information. This request gets assigned to one of these technicians who is unavailable to pick the request on that particular day. The help desk administrator is not aware of the VIPs urgency and the technician's unavailability. In such situations, it becomes a challenge to provide efficient service and satisfy the said VIP requester
ServiceDesk Plus helps you to boldly face such situations and keeps your requesters happy.
Mark your technician as unavailable and configure a back up technician who can assist the requester with his requirement.
To mark the unavailability,
Go to Home (respective technician's web portal) -> Scheduler section -> Choose a day from the calendar -> Mark leave.
To configure the backup technician,Go to Home -> Scheduler section -> Click on the icon on the day marked as leave -> Choose the back up technician.
Let's imagine the COO (among many other end users) of your organization faces intermittent network disconnection. He is in no position to prepare a report on the organization's weekly progress that is to be submitted to the board members the next day. The desperate COO calls up the help desk and asks the coordinator to assign a technician who can fix the network disconnection with high priority. The coordinator creates a ticket and assigns it to a technician who is an expert in network related issues, without realizing that he is unavailable that particular day. The SLA timer keeps ticking, the COO keeps waiting, the coordinator keeps assigning the technician with no idea about the faltered situation.
If this sounds familiar to you, here's how ServiceDesk Plus lets you manage this situation easily and automatically.
Group your technicians into 'Support Groups' based on their expertise and assign a ticket to the group. E.g. Technician groups to handle network issues, desktop hardware, application performance, security, IP phones-related etc.
Go to Admin -> Support Groups (Under users section) -> Add New Group -> Choose the technicians -> Save.
Categorizing technicians based on their expertise will help you to,
Let's assume your IT help desk receives an incident from a user about "network connectivity problem" in his laptop. By pre-configured automation, the ticket gets assigned to a technician group that is skilled with network connectivity issues. A technician analyzes the incident and suspects that the root cause is a faulty NIC (Network Interface Card) in the laptop. In order to replace the NIC, the incident has to be moved to a diferent technician group. Since this particular technician does not have the privilege to re-assign a diferent technician or a technician group to the incident, he adds a note and sends the incident to the administrator for re-assignment. The administrator, who has multiple critical issues to deal with, might take a long time for the re-assignment. Meanwhile , the tasks of the user are deferred and eventually the productivity gets afected. The case is worse if the user has a critical business impact.
ServiceDesk Plus helps you deal with such crisis through a simple, yet powerful configuration.
Empower your technicians with the privilege to assign an incident to a diferent technician or a group.
To do this,
Go to Admin -> Roles (under users section) -> Add New Role or Edit an existing role -> Enable the option "Assigning Technician" under 'Advanced Permissions' section -> Save.
Below is the screenshot of the respective option,
The following screenshot explains the actions that your technicians are entitled to do,
Let's imagine, one of your users has to present the 'Annual Strategic Operations Plan' to the delegates. On doing a last minute check, the user is unable to log in to his laptop due to a password lock in the active directory. He tries to reach out to the IT help desk through phone, but in vain . He has no means to access the help desk application or raise a ticket. As an IT help desk administrator, how will you help this user get over this situation?
Here's how ServiceDesk Plus lets you help a user in scenarios like this.
Empower your users to create a ticket 'On Behalf of' others through their self service portal.
In the above-mentioned scenario, the troubled user can ask his colleague to raise a high priority incident on behalf of him. The help desk technicians get notified as soon as the incident is created and act accordingly.
Below screenshot gives you a glimpse of this feature,
Below is the screenshot of the respective option,
update globalconfig set paramvalue='true' where parameter='ON_BEHALF_OF_USERFIELD';
Aft er enabling, populate the required set of users in the application by executing their corresponding queries.
To know the kind of users that are available, execute the below query
select * from globalconfig where parameter='show_obousers';
To populate all the users,
update globalconfig set paramalue='All' where parameter like '%obo%';
To populate users associated to a specific site,
update globalconfig set paramalue='Site' where parameter like '%obo%';
To populate users associated to a specific department,
update globalconfig set paramalue='Department' where parameter like '%obo%';
It's a Monday morning, and one of your technicians is trashing out the junk emails that were accumulated over the weekend. In the bulk deletion process, he unwittingly deletes an incident that was raised by the CFO of your organization. The technician is unaware of the request deletion, while the CFO frantically waits for a response. At a certain point in time, the CFO calls the IT administrator and bawls for a resolution. Only then the administrator realizes that the incident was trashed out from the IT help desk. The administrator believes that it is disreputable to ask the CFO to raise a new incident. In such situation, how do you keep the credibility of your IT help desk intact?
ServiceDesk Plus lets you to manage this situation with ease.
When you delete requests, they are stored in trash. You can retrieve all deleted requests in a few clicks.
Click on the request filter on the left corner -> Trash. Refer the below screenshot.
Choose the request to be restored and click 'Restore'.
Request trash ensures,
Let's imagine a user is unable to perform an online transaction using his login credentials. He creates a help desk ticket without a mention of the actual error message. On noticing the ticket, the IT technician calls the user to gather more information on the issue. Aft er he gathers the required information, he starts working on the resolution of the issue and forgets to update the first response in the application. Meanwhile the SLA timer is ticking, and records the ticket as first response violated. Now the technician realizes that he has focused on ticket resolution and missed out on the response SLA.
Can you relate this situation? ServiceDesk Plus lets you to smartly track the first response in three diferent ways as follows,
When a technician responds to a requester from within the ticket, the application automatically considers the reply as a first response.
W hen a technician responds to a requester through a phone call, he can add a note and make it as a first response. To add a note, go to requests -> choose a ticket -> actions (at the top) -> add notes.
When a technician adds a worklog to a ticket, he can make the worklog to be considered as a first response. To add a worklog, go to requests -> choose a ticket -> tasks -> work log details -> add new.
ServiceDesk Plus helps,
Have you ever encountered a day where all your users raise tickets with high priority assigned? Let's imagine users raising high priority tickets for a RAM upgrade, application crash, login error in a payroll soft ware, password reset, browser crash etc. When all the tickets come in with high priority assigned, choosing the valid priority for each help desk ticket becomes a nightmare to the technician. How could you help your technicians handle such a challenge smartly?
ServiceDesk Plus helps you to easily prioritize tickets like these with the help of a priority matrix.
The priority matrix automatically assigns the priority to a ticket based on the impact and urgency of the ticket. Priority matrix requires a one-time configuration by the help desk administrator for the respective business impact and urgency values.
To configure priority matrix,
Go to Admin -> Help desk customizer (from help desk section) -> Priority matrix (left pane).
When a user selects an impact and urgency in the request form while creating a new ticket, the configured priority will be automatically assigned to the ticket based on the combination of these two factors.
ServiceDesk Plus helps,
It's a busy day and your help desk technicians are answering the IT help desk tickets. A few tickets are closed with quick resolutions and a few, that require more inputs from users, are moved to On-hold status [to avoid SLA violation]. The heavy workload keeps them busy and they forget about the pending tickets. Interestingly, few users are even busier than your technicians and they don't reply to the tickets. When the IT administrator takes a report of the help desk performance, he sees a huge list of pending tickets and realizes there were no follow-up emails to those users who never responded.
Sound familiar? If yes, here's how ServiceDesk Plus lets you to easily overcome such challenges with the request status scheduler.
Request status scheduler lets you to schedule a ticket to automatically move from On-hold status to any other status that has the SLA timer running [preferably Open].
Go to Requests -> Choose and edit a ticket -> Change the status from Open to On-Hold -> Click on the icon -> the following pop-up appears where you configure the date and time for the ticket to get automatically opened.
Request status scheduler,
Let's say a ticket is automatically assigned to a technician, who is out of office on a particular day. The SLA assigned to the ticket has a response and resolution due by time of four and eight operational hours respectively. Since there is no leave officially marked for the technician, the IT administrator is unaware of the technician's unavailability and the backup technician is not configured as well. It's a busy day and the technicians' focus is on tickets under their scope. On the other hand, the ticket assigned to the unavailable technician approaches SLA violation.
In such situations, will it not be good to get notified about the ticket and proactively prevent SLA violations?
ServiceDesk Plus lets you to cleverly address this challenge through a simple workflow through the actions section under service level agreements.
Go to Admin -> Service Level Agreements -> Choose or Add an SLA -> Actions sections under escalations help you to get notified about the tickets that are fast approaching SLA violation and take proactive actions on them.
20 ServiceDesk Plus Hacks for Better IT Help Desk Management - View PDF.