You can configure the Wi-Fi settings and configure protocol settings for Mac, Apple TV and iOS devices. For iOS 11.3 and above, the wi-fi sharing feature is restricted by default for the Wi-Fi distributed by Mobile Device Manager Plus.
To ease the Wi-Fi configuration process, you can add all the required Wi-Fi configurations to a single profile. This will ensure the device connects to any of the specified Wi-Fi networks when in it's vicinity. It also reduces the chances of the device being unmanaged, in case connection to Wi-Fi networks not distributed by MDM, is restricted. Using this profile, you can ensure managed Apple devices can easily connect to your enterprise's Wi-Fi network.
|Wireless Network identification||Network identification|
|Connect to this Wi-Fi automatically||Automatically join this Wi-Fi network, on detection|
|Hidden network||Enable if target network is not broadcasting|
|MAC Address Randomization||Disabling this turns off the Private Address feature on devices running iOS/iPadOS 14 or above, to prevent them from using randomized MAC addresses while connecting to Wi-Fi networks|
|Security type||Wireless network encryption while connecting|
|Password||Password authentication to connect the Wi-Fi.|
|Configure Protocol(Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any(Enterprise)|
|Protocols Supported||Choose the type of protocol|
|Use Protected Access Credential||Enabling protected access|
|Provision Protected Access Credential||Allow protected access|
|Provision PAC anonymously||Enabling PAC anonymously|
|Authentication Protocol(Can be configured only if Protocol Supported is TTLS)||Select the Authentication Protocol to be used|
|Configure Authentication(Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any(Enterprise)|
|User Name||User Name of the device, (%username%)will get the appropriate User Name, mapped to the device|
|Use per connection Password||User password for initial connection|
|Identity Certificate(Can be configured only if Protocol Supported is TLS/EAP-FAST/TTLS/PEAP||Specify the certificate to be used for Client-based authentication. SCEP certificates can also be utilized for this.|
|Externally Visible Identification||Visible identification|
|Certificate||Specify the CA certificate to be used.|
|Trusted Certificate(Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any(Enterprise)|
|Proxy Settings||Manual or Automatic|
The below mentioned dynamic variables are retrieved from the data that has been provided while enrolling the device.
%username% - will get the appropriate user name, mapped to the device