# Legacy DHCP (ISC DHCP): NetWare/IP Suboptions

Search ISC DHCP NetWare/IP suboptions and review their option codes, descriptions, data types, support status, grammar, and example values.

| Option Code | Option Name | Description | Data Type | Supported | Is Predefined? | Grammar | Example |
|---|---|---|---|---|---|---|---|
| 1 | `nsq-broadcast` | If true, the client should use the NetWare Nearest Server Query to locate a NetWare/IP server. The behaviour of the Novell client if this suboption is false, or is not present, is not specified. | `flag` | True | True | `flag` | `values : true or false or on or off; Example : true` |
| 2 | `preferred-dss` | This suboption specifies a list of up to five IP addresses, each of which should be the IP address of a NetWare Domain SAP/RIP server (DSS). | `ipv4address` | True | True | `ip-address [, ip-address... ]` | `Type : ipv4; Example : 1.1.1.1,2.2.2.2,..,etc` |
| 3 | `nearest-nwip-server` | This suboption specifies a list of up to five IP addresses, each of which should be the IP address of a Nearest NetWare IP server. | `ipv4address` | True | True | `ip-address [, ip-address...]` | `Type : ipv4; Example : 1.1.1.1,2.2.2.2,..,etc` |
| 4 | `autoretries` | Specifies the number of times that a NetWare/IP client should attempt to communicate with a given DSS server at startup. | `uint8` | True | True | `uint8` | `Range : 0-255; Example : 123` |
| 5 | `autoretry-secs` | Specifies the number of seconds that a Netware/IP client should wait between retries when attempting to establish communications with a DSS server at startup. | `uint8` | True | True | `uint8` | `Range : 0-255; Example : 123` |
| 6 | `nwip-1-1` | If true, the NetWare/IP client should support NetWare/IP version 1.1 compatibility. This is only needed if the client will be contacting Netware/IP version 1.1 servers. | `uint8` | True | True | `uint8` | `Range : 0-255; Example : 123` |
| 7 | `primary-dss` | Specifies the IP address of the Primary Domain SAP/RIP Service server (DSS) for this NetWare/IP domain. The NetWare/IP administration utility uses this value as Primary DSS server when configuring a secondary DSS server. | `ipv4address` | True | True | `ip-address` | `Type : ipv4; Example : 1.1.1.1` |