snmp graph tool SNMP Graph Tool                                                            


 

SNMP Graph utility of OpUtils software is used to gather real time data and draws a graph for any SNMP IP node. It also provides the MIB node information like OID, syntax, description and MIB node properties. The SNMP data to be polled should be of integer or unsigned integer data type (Counter, Gauge, or Timeticks).

To plot an SNMP graph

  1. Click the Tools tab.

  2. Choose SNMP Graph available under the SNMP Tools category.

  3. Enter the IP Address or the Host Name of the device to be contacted and the SNMP community.

  4. Select the Object OID or the MIB Node from the combo box (By default, eight OIDs are displayed in the OID combo box). OR enter the required Object OID or MIB Node to plot graph. Graph is plotted only for integer values.
    Note
    : You can also choose to give a node that does not have value in integer format, but the graph will not be plotted, only details about the MIB node will be provided.

  5. To configure SNMP properties click Settings located at the top right corner or click Admin -> Settings. For details read the Configuring SNMP section.

  6. To configure Graph settings such as the polling interval and number of plots, follow the same steps as given above. For more read the section Configuring Graphs

  7. Click the Plot button.

  8. View the SNMP graph. Check the MIB Node Information and MIB Node Properties details.

Note

 1.Graphs show proper information only if the IP Address or Host Name is SNMP-enabled.

2. Choose the Refresh time interval in seconds from the Refresh every list box. The page is refreshed based on the selected time interval.

 

See Also
 

Error Messages : E1001: Unknown Host, E1002: Unreachable Host, E2001: No Response to SNMP Queries, E5002 : Invalid OID, E5001: Unrecognised OID

 

Related Tools: Ping, SNMP Ping, System Snapshot, MIB Module Viewer, MIB Node Viewer

 

Copyright © 2004-2012, ZOHO Corp. All Rights Reserved.
ManageEngine