Help
Contents |
The information on the entire network configuration management process in your enterprise is presented in the form of comprehensive reports vin Network Configuration Manager. The status and summaries of the different activities such as device configuration details, changes in configuration, network inventory, conflict between startup and running configuration, device audit details, policy compliance details etc are provided in the form of tables and graphs, which assist the network administrators to make a well-informed decisions on device configuration.
All details pertaining to the device properties, hardware properties, firmware details, audit details pertaining to the devices etc have been presented under Network Reports.
To access the Network Reports, just go to the "Reports" tab.
|
Report Name |
What does it Convey |
Additional Information |
Firmware Inventory Report |
The OS details of devices such as OS type, version (of each device of all available device groups) are presented in this report. The report is displayed on 'device group' basis. Click "Firmware Inventory Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
Device Inventory Report |
Details such as the model number, series, type etc of each device of all available device groups are presented in this report. The report is displayed on 'device group' basis. Click "Device Inventory Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
Network Health Status Report |
Details such as the status of configuration backup, information if the startup and running configurations differ, information on policy compliance etc of each device of all available device groups are presented in this report. The report is displayed on 'device group' basis. Click "Network Health Status Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
Device Management Status Report
|
Status of basic device management details - if credentials have been supplied, the protocol used (for communication between the device and Network Configuration Manager), the status of real-time change detection etc of each device of all available device groups are presented in this report. The report is displayed on 'device group' basis. Click "Device Management Status Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
Device Audit Report |
Details on who invoked, what operation and when on each device of all available device groups are presented in this report. The report is displayed on 'device group' basis. Click "Device Audit Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
Network Backup Status Report |
The results of the configuration backup done on devices (of each device group) are presented in this report. Number of devices that are backed up, number of devices whose backup failed, and number of devices that are not backed up are presented in this report. The report is displayed on 'device group' basis. Click "Network Backup Status Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
|
Report Name |
What does it Convey |
Additional Information |
Startup-Running Conflict Report |
Devices (of each device group) whose startup and running configurations differ are presented in this report. In addition, there is provision to view the difference between the startup and running configurations. The report is displayed on 'device group' basis. Click "Startup-Running Conflict Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
Configuration Changes Report |
Devices (of each device group) that have undergone changes in configuration are presented in this report. The report is displayed on 'device group' basis. Click "Configuration Changes Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
Configuration Change Trend Report |
Details on the number of configuration changes done on the configuration of devices (of all device groups) during a particular time period are captured along with the mode of configuration change - whether the changes were done through Network Configuration Manager or directly from outside the application are captured. The report is displayed on 'device group' basis. Click "Configuration Change Trend Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
|
Report Name |
What does it Convey |
Additional Information |
CVE ID Report |
The results of the vulnerability scanning report are presented in this report. The report also contains the number of vulnerabilities present in the network and severity wise grouped data. |
In-depth information of each CVE including base score, summary, and reference URL along with published and updated time will be present. |
Exposed Devices Report |
The results of the vulnerability scanning report are presented in this report. The report also contains information about a number of vulnerabilities present in the network and severity wise grouped data. Report is based on the exposed devices in Network Configuration Manager |
Vulnerabilities of each devices will be shown. Also, by expanding, you get the devices' complete information with CVE ID. The top most vulnerability level of the device is taken as its severity level. For example, if critical is the latest severity of the device, then that will be taken as that device's severity. |
Firmware versions with vulnerabilities |
The results of the vulnerability scanning report are presented in this report. The report also contains information about a number of vulnerabilities present in the network and severity wise grouped data. Report is grouped by firmware versions of vulnerable devices available in Network Configuration Manager network. |
Vulnerabilities of each devices will be shown. Also, by expanding, you get the devices' complete information with CVE ID. The top most vulnerability level of the firmware version is taken as its severity level. For example, if moderate is the latest severity of the firwmware version, that that will be taken as that firmware version's severity. |
User Access Report |
Device access authorization details for all users are presented in this report. The list of devices assigned for each user are shown by this report. Click "User Access Report" in the "Reports" tab to generate the report. |
-- |
Configuration Upload Request Report |
The status of configuration upload requests made by the operators and information as to whether the requests are pending or were approved or rejected, are presented in this report. Click "Configuration Upload Request Report" in the "Reports" tab to generate the report. |
-- |
|
Report Name |
What does it Convey |
Additional Information |
Compliance Report |
The result of the compliance policy check done on devices (of each device group) are presented in this report. Number of devices that are compliant, number of devices whose configuration is in violation of the policy, number of compliance policies, rules, the time at which the last compliance check was done etc., are presented in this report.. The report is displayed on 'device group' basis. Click "Compliance Report" in the "Reports" tab to generate the report. |
In the report display page, you can view the report for the each group by selecting the respective group name in the 'Device Group' drop-down on the top of the page. |
PCI Report |
The status of PCI Review made by the specified administartor/ operator as to whether the reviews are pending or completed, are presented in this report. | -- |