VMware Monitoring - what to watch out for

• When any VM has a CPU Ready time of over 20% and the host CPU utilization is also over 90%, it signals CPU overcommitment & would need addition of CPU or VMotion enabling
• More than 1MB/s of swap in or swap out rate signals memory overcommitment
• From an EMA benchmark report, average performing enterprises had physical CPU utilization of 45% while best performing enterprises had this at 70%. Where do you stand?

The above were just a few “rule of thumb” points and VMware metric descriptions that were covered in our webinar titled “VMware Performance Monitoring – the Must Haves”. The presentation that was used for the webinar is embedded below. While we get ready to host the recorded version, you can write to us if you are interested in the transcript of the webinar: opmanager-marketing[at]manageengine[dot]com