Network device configuration management starts with creating an inventory. Since enterprises typically have hundreds of devices, doing this manually can be a pain, especially if the devices need to be listed based on their host name, series, model, etc. You require a network device discovery tool or network device discovery software to automate the discovery process. Network Configuration Manager’s network device discovery feature allows you to add SNMP-enabled devices in bulk in a single click. You can also add network devices manually or import them in bulk from a CSV file. Once the devices are discovered, they get listed in the inventory along with device details such as serial number, port details, IP address, and vendor. With Network Configuration Manager, you can perform Windows network device discovery and Linux network device discovery.
To discover SNMP-enabled devices, Network Configuration Manager sends a request via SSH, Telnet, or SNMP to all nearby devices. Upon receiving the request, the devices will send a SysObject ID (sysOID) to Network Configuration Manager’s discovery engine. The discovery engine will then try to match the received sysOID with the default or custom sysOID. If a match is found, the device will be added and associated with the corresponding device template. If a match is not found, that particular device will not be added. Once communication is established, the configuration files are transferred to Network Configuration Manager using TFTP.
Network device discovery for SNMP-enabled devices can be done in the following ways:
Once the credentials are provided during snmp device addition, the Discovery Reports tab opens automatically. In this section, you will be able to see the list of all the discoveries done till now sorted in descending order starting from recent. You can also view the status of every IP address, which is being discovered by clicking on the IP addresses. Also, when a particular device is not added by snmp addition method due to failure while discovering, but you are sure of it's authenticity, you can directly add it to the Inventory from this section.
To add devices which are not SNMP enabled, you can use the manual addition method and discover network devices to the inventory. You need to provide the Hostname / IP Address, vendor name, device template name and other details to add the device. Once the details are given, that particular network device will be discovered and added in the inventory.
"Device is not responding
This error occurs when the device is
"Device is not added"
|This error occurs if the device is reachable &
SNMP community is correct, but still the device does not get added.
Once the devices are discovered after network discovery, they get added to the inventory. In addition to listing the discovered devices as well as their hardware properties, the inventory also helps you view, label, edit, and upload device configurations from a centralized web GUI. The inventory is a powerful tool because it gives you vital information on all the managed devices. Learn more!
Network device discovery is the process of identifying and cataloging all the devices connected to your network. This includes computers, servers, routers, switches, printers, and any other hardware that is part of the network infrastructure.
Network device discovery works by using various protocols and techniques to communicate with devices on a network and gather information about them. Here's a simplified overview of how it works in Network Configuration Manager:
Automated SNMP-based device discovery:
To add devices which are not SNMP enabled, you can use the manual addition method and discover network devices to the inventory. You need to provide the hostname / IP address, vendor name, device template name, and other details to add the device.