With static NAT, routers or firewalls translate one private IP address to a single public IP address. Each private IP address is mapped to a single public IP address. Static NAT is not often used because it requires one public IP address for each private IP address.
To configure static NAT on Cisco devices using Network Configuration Manager, you can create the corresponding Configlet commands and push them in multiple devices.
If you don't have NCM installed, please click here to download and install the application.
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip nat inside source static 10.0.0.2 126.96.36.199
Router(config-if)#ip nat inside
Router(config-if)#ip nat outside
Building configuration... [OK]
The corresponding configlet can be created in NCM application as shown in below screenshot.
Also you can click the below button to download the Configlet as XML and import it into NCM application using file import option.
|Configlet Name||Configure Static NAT - Cisco|
|Description||This configlet is used to configure static NAT in Cisco devices.|
|Execution Mode||Script Execution Mode|
ip nat inside source static $PRIVATE_IP $PUBLIC_IP
ip nat inside
ip nat outside
show ip nat translations