cisco router details Device Snapshot Tool


 

Device Snapshot utility of OpUtils software provides a quick snap shot of the given Cisco device.

To check the system details of a Cisco Device

  1. Click the Tools tab.

  2. Choose Device Explorer available under the CISCO Tools category.

  3. Select the Device Snapshot from the tree.

  4. Enter the Device Name or its IP Address.
    Note
    : Ensure the device specified is a CISCO device

  5. Enter the SNMP Community String of the device.

  6. To configure SNMP properties click Settings located at the top right corner or click Admin -> Settings. For details read the Configuring SNMP section.

  7. Click the Show button.

  8. Check the results. The results include the device Name; Description; Model Type; the IOS Version; the Flash Memory Size (used and available); RAM size; the Location ( i.e., the physical location of the device as specified by the Administrator); the Contact person for the device (as specified by the Administrator); Up since time; and the router's Interfaces details. The status of the Interfaces is represented by the following icons:

                                                                                        

          Serial port down    Serial  port up     Ethernet port down       Ethernet port up

 

See Also
 

Error Messages : E1001: Unknown Host, E1002: Unreachable Host, E2001: No Response to SNMP Queries, E4005: Not a CISCO Device

 

Related Tools: Ping, SNMP Ping, IP Node Browser, Chassis, IOS, Flash, Interfaces

 

 

Copyright © 2004-2012, ZOHO Corp. All Rights Reserved.
ManageEngine