Cisco AVC ART Configuration

    You can perform Cisco AVC ART configuration using the following steps:

    flow exporter NFA
    destination {NETFLOW_SERVER_IP}
    export-protocol netflow-v9
    template data timeout 60
    option interface-table
    option application-table
    option application-attributes
    option metadata-version-table

    class-map match any NFA_ART
    match any

    flow record type mace NFA
    collect ipv4 dscp
    collect interface input
    collect interface output
    collect application name
    collect counter client bytes
    collect counter server bytes
    collect counter client packets
    collect counter server packets
    collect art all

    flow record type performance-monitor NFA_NBAR
    match ipv4 tos
    match ipv4 protocol
    match ipv4 source address
    match ipv4 destination address
    match transport source-port
    match transport destination-port
    match interface input
    match interface output
    match flow direction
    match application name
    collect datalink dot1q vlan input
    collect datalink dot1q vlan output
    collect routing destination as
    collect routing next-hop address ipv4
    collect ipv4 dscp
    collect ipv4 id
    collect ipv4 source prefix
    collect ipv4 source mask
    collect ipv4 destination mask
    collect transport tcp source-port
    collect transport tcp destination-port
    collect transport tcp flags
    collect transport udp source-port
    collect transport udp destination-port
    collect counter bytes
    collect counter packets
    collect timestamp sys-uptime first
    collect timestamp sys-uptime last

    flow monitor type performance-monitor NFA
    record NFA_NBAR
    exporter NFA
    cache timeout active 60

    flow monitor type mace NFA-ART
    record NFA
    exporter NFA

    policy-map type performance-monitor NFA
    class class-default
    flow monitor NFA

    policy-map type mace mace_global
    class NFA_ART
    flow monitor NFA_ART

    Enter global configuration mode on the router or MSFC, and issue the following commands for each interface on which you want to enable flow:

    interface {INTERFACE_NAME}
    service-policy type performance-monitor input NFA
    service-policy type performance-monitor output NFA
    mace enable