IP tools

IP tools by ManageEngine OpUtils is a set of powerful IP address tools that help you perform WHOIS IP lookup, system details updates, DNS, and Dynamic Host Configuration Protocol (DHCP) monitoring for IPv4 and IPv6 addresses. Supporting both IPv4 and IPv6, OpUtils IP tools expedites pulling out data on IP addresses, DNS records, DHCPs, and network devices. With a code-free, intuitive UI, download IP tools and easily view details on your IP address, and enable hassle-free network monitoring and efficient troubleshooting.

The OpUtils IP engineering toolset includes:

IP Request tool

ManageEngine OpUtils' built-in IP Request tool is a part of the IP Address Manager module, that helps network admins simplify IP address management. With this tool, network operators can create IP requests, view the details and status of the logged request, and the details of all the previous IP requests raised by them.

Network admins can view IP address requests raised by all the IT operators. They can choose to either grant or deny the IP request as required. Also, OpUtils enables network admins to change the specifications of the IP requests, such as changing the requested IPs or subnets, and then granting the IP request.

To learn how to configure and raise IP Request with the tool, visit: IP Request tool help doc.

IP Request - ManageEngine OpUtils

IP Ping tools

The IP tools included under IP ping tools are,


Verify if a target host or server is alive and responding to network accesses using the Ping tool. This IP tool uses the Internet Control Message Protocol (ICMP) to send an IP packet to the device and determines its status.

IP Tools - ManageEngine OpUtils


Query and verify using the Simple Network Management Protocol (SNMP) to check if an SNMP-enabled device is operating and network accessible using the SNMP ping tool.

Network IP Tools - ManageEngine OpUtils

Proxy Ping

Verify if a device behind a proxy is online by pinging the Cisco router using the Proxy Ping tool. This router acts as the proxy for the target device.

IP Address Tools - ManageEngine OpUtils

Trace Route

Gain visibility into the path taken by a packet in a network with Trace Route. This IP tool displays the number of hops the packet takes to reach the target device, and displays the IP address for each hop. sequentially.

IP Tools Network Utilities - ManageEngine OpUtils

IP Address Monitoring tools

MAC Address Resolver

Verify the MAC address associated with a particular IP address by performing an IP lookup in your network address space. View details such as MAC Address, System Name, System Type, and more details on the MAC associated with the target IP address.

MAC IP Address Tool - ManageEngine OpUtils

DNS Resolver

Verify the host associated with an IP by fetching the host of the node whose IP is known and vice versa.

DNS IP Resolver Tool - ManageEngine OpUtils

DHCP Scope Monitor

Pull IP Scopes, and relate your available and used IP addresses to your DHCP Servers with DHCP Scope Monitor. Get a clear view of your IP Address space by managing your Server IP and DHCP Servers combined.


Perform IP lookup to access details about IP location, MAC Address, DNS Name, NIC Type, and more. View and manage your inventory information with the MAC IP List tool, which regularly updates this information. The details pulled by this IP tool can be also used to work with several other IP tools.

IP Tools MAC - ManageEngine OpUtils

IP Network Monitoring tools

The IP tools for network monitoring are,

Network Scanner

Scan your entire IP address range with ICMP or SNMP, and view the availability of devices, forward and reverse lookup actions, and more using Network Scanner.

Network IP Scanner - ManageEngine OpUtils

Port Scanner

View details specific to your network ports, such as whether a port is open or occupied, services running on an occupied port, and responding ports using the Port Scanner tool.

Port IP Scanner - ManageEngine OpUtils

System Explorer

Gain complete visibility into SNMP-enabled device details, such as System Snapshot, Process Scan, Software Scan, and more using the System Explorer tool. This tool is a part of OpUtils network IP tools, which enables you to explore devices and hosts in your network.

IP System Explorer - ManageEngine OpUtils

TCP Reset

Reset unwanted Transmission Control Protocol (TCP) connections established between the switches and routers in the network using TCP Reset network IP tool.

TCP IP Reset - ManageEngine OpUtils

System Details Update

Gain visibility into the details of your networked SNMP-enabled devices, and update or edit them using IP Tools network utilities. By specifying the SNMP write community, you can update the system details of a device by scanning its IP, or a group of devices by scanning a range of IPs. System Details Update updates the device details, including Sys Name and Sys Location, and also shows you its status. You can remotely update the system details of your network devices, right from your OpUtils console.

SNMP tools

The network utilities under SNMP tools are,

MIB Browser

The MIB Browser tool enables you to perform all SNMP operations such as GET, GET-NEXT, GET-BULK, and SET. View, load, browse, and perform several operations on your network MIBs such as load/unload, SNMP operations, view OIDs listed, and more.

IP MIB Browser - ManageEngine OpUtils

SNMP Graph

View graphs of any SNMP IP node by using the SNMP Graph tool. This IP Tool gathers real-time data and draws a graph that also allows you to view information like object ID (OID), syntax, description, and more.

IP SNMP Graph - ManageEngine OpUtils

MIB Node Viewer

Access comprehensive details of your OIDs such as the MIB Module Name, Parent Name, Macro Type, Status, and Syntax.

MIB Viewer Tool - ManageEngine OpUtils

MIB Module Viewer

View snapshots of your target MIB including defined attributes, total number of nodes, defined Textual Conventions (TCs), traps, and SMIv2 specific details.

MIB Module Viewer Tools - ManageEngine OpUtils

Community Checker

Get the read and write community strings of a range of IP addresses based on the predefined set of defaults and standard community strings for switches, routers, etc.

IP Community Checker - ManageEngine OpUtils

Trap Receiver

Collect, log, view, and analyze all the traps raised by network devices. These traps are collected by the trap monitor and sent to you in the form of SNMP trap notifications.

CISCO tools

IP network utilities for CISCO tools are,

Device Scan

Scan a subnet or a range of IP addresses, and view information about the CISCO devices in the scanned range. The data includes the Chassis ID, ROM version, IOS version, and more.

IP Device Scanner - ManageEngine OpUtils

Device Explorer

View complete details of network CISCO devices such as device snapshot, chassis details, flash memory details, interfaces, IOS details, IP routes, and access lists.

IP Device Explorer - ManageEngine OpUtils

Advantages of OpUtils IP Address tools

IP Tools by OpUtils enables you to carry out network engineering tasks with ease. Using an IP Tools software, gain comprehensive insights into your network infrastructure and perform effective troubleshooting. OpUtils IP Tools download can be your key to,

  1. IP-specific network metrics: Pull out IP-specific details from your network such as MACs to which the IPs are allocated, reserve IPs, connected ports, and more with IP tools like MAC IP List, which can help you perform IP lookup.
  2. DNS and DHCP monitoring: Gain visibility into your DNS and DHCP components such as their name, IP address, Status, Response Time, and Scopes Count with IP network utilities like DNS resolver.
  3. Network device details: Inspect your network devices and their statuses with IP tools like SNMP Ping. Find devices that are responding to a request or ping, devices that are up and running, MAC addresses, and more.
  4. Network overview: Analyze how information moves in your network with IP tools like Trace Route, which provides visibility into your network switches and routers.

IP management tools with OpUtils

OpUtils offers a comprehensive IP management solution that enables you to effectively monitor, manage, and troubleshoot your IP resources with ease. The IP management aspects of OpUtils include:

  • IP Address Manager (IPAM): Enables you to monitor and manage you network IP address space with real-time data and IP performance metrics. You can view comprehensive insights into your network’s IP resources such as IP Availability Summary, Top 10 Subnets with Occupied IPs, Network Interface Card (NIC) Type Summary, and DNS Status Summary.
  • Advanced IP scanner: Declutters IP scanning with regular scans, continuous IP status updates, and displaying connected switch port details. It displays real-time insights of your IP address space and network device connectivity, and allows you to scan and monitor your IP address space in an agile subnet-based hierarchy.
  • IP Address Tracker: Streamlines your IP address space tracking by supporting both IPv4 and IPv6 tracking from a single console. It helps you keep track of dynamic IPs, and provides complete visibility into your network with cross subnet IP tracking.
  • IP Monitor: Provides historical insights into IPs allocated to heterogeneous devices, and also provides logs, audits, and reports to monitor network performance. It offers efficient troubleshooting with real-time alerts and notifications if anything goes wrong with your network.

What are IP Tools?

IP tools are network engineering tools used in scanning and troubleshooting network IP address space with ease. IP tools enable network admins to audit, track, and monitor the performance of IP addresses, subnets, and the devices and hosts that are using IPs. This comprehensive network engineering tool set includes advanced IP tools like Ping, System Explorer, MAC Address Resolver, and Trace Route, which aid network engineers in setting up and carrying out everyday network management tasks.

How to use IP tools?

Start using IP tools by downloading and setting up OpUtils in your network. OpUtils easily integrates with your existing network infrastructure without any additional requirements. To use IP tools follow the steps given below,

  1. Download and install ManageEngine OpUtils in your network.
  2. Add your IP address space, subnets, DNS, DHCP, and Active Directories.
  3. Under the Toolset tab in the network tools console, select the required IP tool.
  4. Start managing, and troubleshooting your network IP Address space using IP tools network utilities with ease!

Getting started with OpUtils network IP tools

If you're new to OpUtils, which offers a unified IP Address Manager, Switch Port Mapper, advance IP tools, and more, you can schedule a live demo with our product expert. We would be pleased to uncover all the advanced IP and switch port management features OpUtils has to offer with a live product demo and answer your questions. You can also take a feature tour of OpUtils and its IP tools software, and explore how you can master managing complex networks with OpUtils.

OpUtils offers IP tools for Windows, and IP tools for Linux. Interested in seeing how OpUtils can work for your network? Download a 30-day free trial and get started with OpUtils in as little as an hour! OpUtils' network scanning software seamlessly integrates into your existing network environment with little to no changes needed to your network infrastructure.