pdf icon
Category Filter
x

Wi-Fi

You can configure the Wi-Fi settings and configure protocol settings for mac, Apple TV and iOS devices. For iOS 11.3 and above, the wi-fi sharing feature is restricted by default for the Wi-Fi distributed by Mobile Device Manager Plus.

To ease the Wi-Fi configuration process, you can add all the required Wi-Fi configurations to a single profile. This will ensure the device connects to any of the specified Wi-Fi networks when in it's vicinity. It also reduces the chances of the device being unmanaged, in case connection to Wi-Fi networks not distributed by MDM, is restricted.

Policy Description

PROFILE SPECIFICATION DESCRIPTION
Wireless Network identification Network identification
Connect to this Wi-Fi automatically Automatically join this Wi-Fi network, on detection
Hidden network Enable if target network is not broadcasting
MAC Address Randomization Disabling this turns off the Private Address feature on devices running iOS/iPadOS 14 or above, to prevent them from using randomized MAC addresses while connecting to Wi-Fi networks
Security type Wireless network encryption while connecting
Password Password authentication to connect the Wi-Fi.
Configure Protocol(Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any(Enterprise)
Protocols Supported Choose the type of protocol
Use Protected Access Credential Enabling protected access
Provision Protected Access Credential Allow protected access
Provision PAC anonymously Enabling PAC anonymously
Authentication Protocol(Can be configured only if Protocol Supported is TTLS) Select the Authentication Protocol to be used
Configure Authentication(Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any(Enterprise)
User Name User Name of the device, (%username%)will get the appropriate User Name, mapped to the device
Use per connection Password User password for initial connection
Identity Certificate(Can be configured only if Protocol Supported is TLS/EAP-FAST/TTLS/PEAP Specify the certificate to be used for Client-based authentication. SCEP certificates can also be utilized for this.
Externally Visible Identification Visible identification
Certificate Specify the CA certificate to be used.
Trusted Certificate(Can be configured only if Security Type is one amongst WEP Enterprise, WPA/WPA2 Enterprise and Any(Enterprise)
Configure Proxy
Proxy Settings Manual or Automatic

Dynamic Variables

The below mentioned dynamic variables are retrieved from the data that has been provided while enrolling the device.

%username% - will get the appropriate user name, mapped to the device

Jump To

    Related Articles