| Event ID |
Description |
| 101001 |
101001: Failover cable OK |
| 101002 |
101002: Bad failover cable |
| 101003 |
101003: Failover cable not connected (this unit) |
| 101004 |
101004: Failover cable not connected (other unit) |
| 101005 |
101005: Error reading failover cable status |
| 103001 |
103001: No response from other firewall |
| 103002 |
103002: Other firewall network interface OK |
| 103003 |
103003: Other firewall network interface failed |
| 103004 |
103004: Other firewall reports this firewall failed |
| 103005 |
103005: Other firewall reporting failure |
| 103006 |
103006: Mate version is not compatible with this |
| 103007 |
103007: Mate version number is not identical with our version number |
| 103008 |
103008: Mate hwdib is not compatible |
| 104001 |
104001: Switching to Active |
| 104002 |
104002: Switching to Standby |
| 104003 |
104003: Switching to Failed |
| 104004 |
104004: Switching to OK |
| 104500 |
104500: Switching to Active |
| 104501 |
104501: Switching to Backup |
| 104502 |
104502: Becoming backup unit failed |
| 105001 |
105001: Disabling failover |
| 105002 |
105002: Enabling failover |
| 105003 |
105003: Monitoring on an interface waiting |
| 105004 |
105004: Monitoring on an interface normal |
| 105005 |
105005: Lost failover communications with mate on an interface |
| 105006 |
105006: Link status up on an interface |
| 105007 |
105007: Link status down on an interface |
| 105008 |
105008: Testing an interface |
| 105009 |
105009: Testing an interface (Passed / Failed) |
| 105010 |
105010: Failover message block allocation failed |
| 105011 |
105011: Failover cable communication failure |
| 105020 |
105020: Incomplete / slow configuration replication |
| 105021 |
105021: Standby unit failed to sync due to a locked configuration |
| 105031 |
105031: Failover LAN interface is up |
| 105032 |
105032: Failover LAN interface is down |
| 105033 |
105033: LAN failover cmd interface down and up again |
| 105034 |
105034: Receive a LAN failover interface up message from peer |
| 105035 |
105035: Receive a LAN failover interface down msg from peer |
| 105036 |
105036: Dropped a LAN failover command message |
| 105037 |
105037: The primary and standby units are switching back and forth as the Active unit |
| 105038 |
105038: Interface count mismatch |
| 105039 |
105039: Unable to verify the interface count with mate |
| 105040 |
105040: Mate failover version is not compatible |
| 105041 |
105041: Command failed during sync |
| 105042 |
105042: Failover interface OK |
| 105043 |
105043: Failover interface failed |
| 105044 |
105044: Mate operational mode is not compatible with my mode |
| 105045 |
105045: Mate license is not compatible with my license |
| 105046 |
105046: Mate has a different chassis |
| 105047 |
105047: Mate has a card in slot which is different from my card |
| 105048 |
105048: Mate_s service module is different from mine |
| 105050 |
105050: ASAv ethernet interface mismatch |
| 105500 |
105500: Started HA |
| 105501 |
105501: Stopped HA |
| 105502 |
105502: Restarting cloud HA on this unit |
| 105503 |
105503: Internal state change |
| 105504 |
105504: Connected to peer |
| 105505 |
105505: Failed to connect to peer unit |
| 105506 |
105506: Unable to create socket on port for failover connection or load balancer probes |
| 105507 |
105507: Unable to bind socket on port for failover connection or load balancer probes |
| 105508 |
105508: Error creating failover connection socket on port |
| 105509 |
105509: Error sending message to peer unit |
| 105510 |
105510: Error receiving message from peer unit |
| 105511 |
105511: Incomplete read of message header from peer unit |
| 105512 |
105512: Error receiving body of message from peer unit |
| 105513 |
105513: Incomplete read of body of message from peer unit |
| 105514 |
105514: Error occurred when responding to message received from peer unit |
| 105515 |
105515: Error receiving message from peer unit |
| 105516 |
105516: Incomplete read of header of message from peer unit |
| 105517 |
105517: Error receiving body of message from peer unit |
| 105518 |
105518: Incomplete read of body of message from peer unit |
| 105519 |
105519: Invalid response to message received from peer unit |
| 105520 |
105520: Responding to Azure Load Balancer probes |
| 105521 |
105521: No longer responding to Azure Load Balancer probes |
| 105522 |
105522: Updating route |
| 105523 |
105523: Route updated |
| 105524 |
105524: Transitioning to negotiating state due to the presence of another Active HA unit |
| 105525 |
105525: Incomplete configuration to initiate access token change request |
| 105526 |
105526: Unexpected status in response to access token request |
| 105527 |
105527: Failure reading response to access token request |
| 105528 |
105528: No access token in response to access token request |
| 105529 |
105529: Error creating authentication header from access token |
| 105530 |
105530: No response to access token request URL |
| 105531 |
105531: Failed to obtain route-table information needed for change request |
| 105532 |
105532: Unexpected status in response to route-table change request |
| 105533 |
105533: Failure reading response to route-table change request |
| 105534 |
105534: No provisioning state in response to route-table change request |
| 105535 |
105535: No response to route-table change request from URL |
| 105536 |
105536: Failed to obtain Azure authentication header for route status request |
| 105537 |
105537: Unexpected status in response to route state request |
| 105538 |
105538: Failure reading response to route state request |
| 105539 |
105539: No response to route state request from URL |
| 105540 |
105540: No route-tables configured |
| 105541 |
105541: Failed to update route-table |
| 105542 |
105542: Enabling load balancer probe responses |
| 105543 |
105543: Disabling load balancer probe responses |
| 105544 |
105544: Error creating load balancer probe socket on port |
| 105545 |
105545: Error starting load balancer probe socket on port |
| 105546 |
105546: Error starting load balancer probe handler |
| 105547 |
105547: Error generating encryption key for Azure secret key |
| 105548 |
105548: Error storing encryption key for Azure secret key |
| 105549 |
105549: Error retrieving encryption key for Azure secret key |
| 105550 |
105550: Error encrypting Azure secret key |
| 105551 |
105551: Error decrypting Azure secret key |
| 105552 |
105552: Stopped HA |
| 105553 |
105553: Detected another Active HA unit |
| 106001 |
106001: Inbound TCP connection denied |
| 106002 |
106002: Connection denied by outbound list |
| 106006 |
106006: Deny inbound UDP on interface |
| 106007 |
106007: Deny inbound UDP due to DNS |
| 106010 |
106010: Deny inbound traffic |
| 106011 |
106011: Deny inbound (no xlate) string |
| 106012 |
106012: Deny IP packet |
| 106013 |
106013: Dropping echo request to PAT address |
| 106014 |
106014: Deny inbound ICMP source |
| 106015 |
106015: Deny TCP packet |
| 106016 |
106016: Deny IP spoof on interface |
| 106017 |
106017: Deny IP packet due to land attack |
| 106018 |
106018: ICMP packet type denied by outbound list |
| 106020 |
106020: Deny IP teardrop fragment |
| 106021 |
106021: Deny protocol reverse path check |
| 106022 |
106022: Deny protocol connection spoof |
| 106023 |
106023: Deny protocol by access group |
| 106024 |
106024: Access rules memory exhausted |
| 106025 |
106025: Failed to determine the security context for a packet |
| 106026 |
106026: Failed to determine the security context for a packet |
| 106027 |
106027: Deny source by access-group |
| 106101 |
106101: The number of ACL log deny-flows has reached limit |
| 106102 |
106102: Packet permitted or denied by ACL applied through VPN filter |
| 106103 |
106103: Packet denied by ACL applied through VPN filter |
| 107001 |
107001: RIP authentication failed |
| 107002 |
107002: RIP packet failed |
| 108002 |
108002: SMTP replaced string |
| 108003 |
108003: Terminating ESMTP/ SMTP connection |
| 108004 |
108004: Configured action taken after ESMTP classification |
| 108005 |
108005: Standalone log action taken after ESMTP classification |
| 108006 |
108006: Detected ESMTP size violation |
| 108007 |
108007: TLS started on ESMTP session between client and server |
| 109001 |
109001: Authentication started for user |
| 109002 |
109002: Authentication failed |
| 109003 |
109003: All authentication server failed |
| 109005 |
109005: Authentication succeeded for a user |
| 109006 |
109006: Authentication failed for user due to incorrect password |
| 109007 |
109007: Authorization permitted for user |
| 109008 |
109008: Authorization denied for user due to incorrect password |
| 109010 |
109010: Authentication failed due to many pending requests |
| 109011 |
109011: Authentication session started |
| 109012 |
109012: Authentication session ended |
| 109013 |
109013: User must authenticate before using this service |
| 109014 |
109014: Non-Telnet connection was denied to the configured virtual Telnet IP address. |
| 109016 |
109016: Unable to find authorization ACL for user |
| 109017 |
109017: User exceeded authentication proxy connection limit |
| 109018 |
109018: Downloaded ACL is empty |
| 109019 |
109019: Downloaded ACL has parsing error |
| 109020 |
109020: Downloaded ACL has configuration error |
| 109021 |
109021: User authentication null proxy error |
| 109022 |
109022: Exceeded HTTPS proxy process limit |
| 109023 |
109023: User must authenticate before using the service |
| 109024 |
109024: Authorization denied for unauthenticated user |
| 109025 |
109025: Authorization denied due to check failure |
| 109026 |
109026: Invalid reply digest received |
| 109027 |
109027: Unable to decipher response message |
| 109028 |
Error message 109028: AAA bypassed for same-security traffic |
| 109029 |
109029: Parsing downloaded string |
| 109030 |
109030: Auto-detect ACL convert wildcard did not convert ACL |
| 109031 |
109031: NT Domain Authentication Failed |
| 109032 |
109032: Unable to install ACL |
| 109033 |
109033: Authentication failed for admin user |
| 109034 |
109034: Authentication failed for network user |
| 109035 |
109035: Exceeded maximum number of DAP attribute instances for user |
| 109036 |
109036: Exceeded 1000 attribute values for an attribute of a user |
| 109037 |
109037: Exceeded 5000 attribute values for an attribute of a user |
| 109038 |
109038: Value of attribute from AAA server could not be parsed as a string representation of the attribute name |
| 109039 |
109039: Dropping an unsupported IPv6/IP46/IP64 packet |
| 109040 |
109040: User exceeded auth proxy rate limit of 10 connections/sec |
| 109100 |
109100: Received CoA update |
| 109101 |
109101: Received CoA disconnect request |
| 109102 |
109102: Received CoA but unable to find named session |
| 109103 |
109103: Received CoA but failed to process successfully |
| 109104 |
109104: Received CoA but action not supported |
| 109105 |
109105: Failed to determine the egress interface for locally generated traffic |
| 110002 |
110002: Failed to locate egress interface |
| 110003 |
110003: Routing failed to locate next hop |
| 110004 |
110004: Egress interface changed |
| 111001 |
111001: Writing to a device |
| 111002 |
111002: Reading from a device |
| 111003 |
111003: Erase configuration |
| 111004 |
111004: End configuration |
| 111005 |
111005: End configuration |
| 111007 |
111007: Reading from device |
| 111008 |
111008: User executed a command |
| 111009 |
111009: User executed a command |
| 111010 |
111010: User running application from IP address and executed a command |
| 111111 |
111111: Error message |
| 112001 |
112001: Clear complete |
| 113001 |
113001: Unable to open AAA session as session limit was reached |
| 113003 |
113003: AAA group policy for user is set to a policy |
| 113004 |
113004: Operation on an IPsec or WebVPN connection successful |
| 113005 |
113005: AAA authentication on a connection failed |
| 113006 |
113006: User locked out on exceeding number of successive failed authentication attempts |
| 113007 |
113007: User unlocked by administrator |
| 113008 |
113008: AAA transaction accepted |
| 113009 |
113009: AAA retrieved default group policy for a user |
| 113010 |
113010: AAA challenge received for a user from a server |
| 113011 |
113011: AAA retrieved user specific group policy for a user |
| 113012 |
113012: AAA user authentication successful in local database |
| 113013 |
113013: AAA unable to complete a request |
| 113014 |
113014: AAA authentication server not accessible |
| 113015 |
113015: AAA user authentication rejected in local database |
| 113016 |
113016: AAA credentials rejected |
| 113017 |
113017: AAA credentials rejected in local database |
| 113018 |
113018: Unsupported ACL entry downloaded |
| 113019 |
113019: Idle user is disconnected |
| 113020 |
113020: Clock skew with server more than 300 seconds |
| 113021 |
113021: Attempted console login failed because user did not have appropriate admin rights |
| 113022 |
113022: AAA Marking RADIUS server in aaa-server group AAA-using-DNS as FAILED |
| 113023 |
113023: AAA marking server in server group as Active |
| 113024 |
113024: Authenticating connection from client certificate |
| 113025 |
113025: Unable to authenticate connection |
| 113026 |
113026: Error while executing Lua script for a group |
| 113027 |
113027: Error activating tunnel-group scripts |
| 113028 |
113028: Extraction of username from VPN client certificate |
| 113029 |
113029: Unable to establish session |
| 113030 |
113030: ACL from AAA doesn't exist on the device |
| 113031 |
113031: ACL not applied because VPN filter is an IPv6 ACL |
| 113032 |
113032: ACL not applied because VPN filter is an IPv4 ACL |
| 113033 |
113033: ACL parse error |
| 113034 |
113034: AV-PAIR ACL used as user ACL from AAA ignored |
| 113035 |
113035: AnyConnect not enabled or invalid AnyConnect image on the ASA |
| 113036 |
113036: AAA parameter value invalid |
| 113037 |
113037: Reboot pending and new sessions disabled |
| 113038 |
113038: Unable to create AnyConnect parent session |
| 113039 |
113039: AnyConnect parent session started |
| 113040 |
113040: Terminating the VPN connection attempt |
| 113041 |
113041: Redirect ACL configured for an IP address does not exist on the device |
| 113042 |
113042: Non-HTTP connection denied by redirect filter |
| 114001 |
114001: Failed to initialize 4GE SSM I/O card |
| 114002 |
114002: Failed to initialize SFP in 4GE SSM I/O card |
| 114003 |
114003: Failed to run cached commands in 4GE SSM I/O card |
| 114004 |
114004: 4GE SSM I/O Initialization start |
| 114005 |
114005: 4GE SSM I/O Initialization end |
| 114006 |
114006: Failed to get port statistics in 4GE SSM I/O card |
| 114007 |
114007: Failed to get current MSR in 4GE SSM I/O card |
| 114008 |
114008: Failed to enable port after link is up in 4GE SSM I/O card |
| 114009 |
114009: Failed to set multicast address in 4GE SSM I/O card |
| 114010 |
114010: Failed to set multicast hardware address in 4GE SSM I/O card |
| 114011 |
114011: Failed to delete multicast address in 4GE SSM I/O card |
| 114012 |
114012: Failed to delete multicast hardware address in 4GE SSM I/O card |
| 114013 |
114013: Failed to set MAC address table in 4GE SSM I/O card |
| 114014 |
114014: Failed to set MAC address in 4GE SSM I/O card |
| 114015 |
114015: Failed to set mode in 4GE SSM I/O card |
| 114016 |
114016: Failed to set multicast mode in 4GE SSM I/O card |
| 114017 |
114017: Failed to get link status in 4GE SSM I/O card |
| 114018 |
114018: Failed to set port speed in 4GE SSM I/O card |
| 114019 |
114019: Failed to set media type in 4GE SSM I/O card |
| 114020 |
114020: Port link speed is unknown in 4GE SSM I/O card |
| 114021 |
114021: Failed to set multicast address table in 4GE SSM I/O card |
| 114022 |
114022: Failed to pass broadcast traffic in 4GE SSM I/O card |
| 114023 |
114023: Failed to cache/flush MAC table in 4GE SSM I/O card |
| 115000 |
115000: Critical assertion in process |
| 115001 |
115001: Error in process |
| 115002 |
115002: Warning in process |
| 120001 |
120001: Smart Call Home module is started |
| 120002 |
120002: Smart Call Home module is terminated |
| 120003 |
120003: Smart Call Home module retrieved event to process |
| 120004 |
120004: Event dropped |
| 120005 |
120005: Message dropped |
| 120006 |
120006: Delivering message failed |
| 120007 |
120007: Message delivered |
| 120008 |
120008: SCH client activated |
| 120009 |
120009: SCH client deactivated |
| 120010 |
120010: Notify command to SCH client failed |
| 120011 |
120011: Ensure Smart Call Home can properly communicate with Cisco |
| 120012 |
120012: User chose a Call Home anonymous reporting at the prompt |
| 199001 |
199001: Reload command executed from Telnet |
| 199002 |
199002: ASA startup completed and beginning operation |
| 199003 |
199003: Reducing link MTU |
| 199005 |
199005: ASA startup began |
| 199010 |
199010: Signal 11 caught in a process or fiber |
| 199011 |
199011: Close condition on bad channel in a process or fiber |
| 199012 |
199012: Stack Smash condition detected |
| 199013 |
199013: Variable syslog |
| 199014 |
199014: Variable syslog |
| 199015 |
199015: Variable syslog |
| 199016 |
199016: Variable syslog |
| 199017 |
199017: Variable syslog |
| 199018 |
199018: Variable syslog |
| 199019 |
199019: Variable syslog |
| 199020 |
199020: System memory utilization has reached a percentage |
| 199021 |
199021: System memory utilization has reached the configured watchdog trigger level |
| 201002 |
201002: Too many TCP connections |
| 201003 |
201003: Embryonic limit exceeded |
| 201004 |
201004: Too many UDP connections |
| 201005 |
201005: FTP data connection failed |
| 201006 |
201006: RCMD back-connection failed for an IP address or a port |
| 201008 |
201008: Disallowing new connections |
| 201009 |
201009: TCP connection limit exceeded |
| 201010 |
201010: Embyonic connection limit exceeded |
| 201011 |
201011: Connection limit exceeded |
| 201012 |
201012: Per-client embryonic connection limit exceeded |
| 201013 |
201013: Per-client connection limit exceeded |
| 202001 |
202001: Out of address translation slots |
| 202005 |
202005: Non-embryonic object in embryonic list |
| 202010 |
202010: NAT or PAT pool exhausted |
| 202016 |
202016: Unable to allocate SIP secondary channel for message |
| 208005 |
208005: Clear command return code |
| 209003 |
209003: Fragment database limit exceeded |
| 209004 |
209004: Invalid IP fragment |
| 209005 |
209005: Too many elements in a fragment set |
| 210001 |
210001: LU error |
| 210002 |
210002: LU allocate block failed |
| 210003 |
210003: Unknown LU object |
| 210005 |
210005: LU allocate connection failed |
| 210006 |
210006: LU look NAT failed |
| 210007 |
210007: LU allocate xlate failed |
| 210008 |
210008: LU no xlate |
| 210010 |
210010: LU making UDP connection failed |
| 210020 |
210020: LU PAT port reserve failed |
| 210021 |
210021: LU create static xlate failed |
| 210022 |
210022: LU missed updates |
| 211001 |
211001: Memory allocation error |
| 211003 |
211003: Error in computed percentage CPU usage value |
| 211004 |
211004: Minimum memory requirement for ASA not met |
| 212001 |
212001: Unable to open SNMP channel |
| 212002 |
212002: Unable to open SNMP trap channel |
| 212003 |
212003: Unable to receive SNMP request |
| 212004 |
212004: Unable to send SNMP response |
| 212005 |
212005: Incoming SNMP request exceeds data buffer size |
| 212006 |
212006: Dropping SNMP request |
| 212009 |
212009: Configuration request for an SNMP group failed |
| 212010 |
212010: Configuration request for SNMP user failed |
| 212011 |
212011: SNMP engineBoots is set to maximum value |
| 212012 |
212012: Unable to write SNMP engine data to persistent storage |
| 213001 |
213001: PPTP control daemon socket I/O error |
| 213002 |
213002: PPTP tunnel hashtable insert failed |
| 213003 |
213003: PPP virtual interface is not opened |
| 213004 |
213004: PPP virtual interface client IP allocation failed |
| 213005 |
213005: DAP action aborted |
| 213006 |
213006: Unable to read DAP record |
| 213007 |
213007: Failed to install redirect URL |
| 214001 |
214001: Terminating manager session |
| 215001 |
215001: Bad route_compress() call |
| 216001 |
216001: Internal error |
| 216002 |
216002: Unexpected event |
| 216003 |
216003: Unrecognized timer |
| 216004 |
216004: Internal logic error |
| 216005 |
216005: Duplex mismatch resulted in transmitter backup |
| 217001 |
217001: No memory for string |
| 218001 |
218001: Failed identification test |
| 218002 |
218002: Module is not certified for live network operation |
| 218003 |
218003: Module is obsolete |
| 218004 |
218004: Failed identification test |
| 218005 |
218005: Inconsistency detected in the system information programmed in non-volatile memory |
| 219002 |
219002: I2C serial bus API error |
| 302003 |
302003: Built H245 connection |
| 302004 |
302004: Preallocate H.323 UDP back connection |
| 302010 |
302010: TCP connection restarted |
| 302012 |
302012: Pre-allocate H225 Call Signalling Connection |
| 302013 |
302013: Built TCP connection |
| 302014 |
302014: Teardown TCP connection |
| 302015 |
302015: Built UDP connection |
| 302016 |
302016: Teardown UDP connection |
| 302017 |
302017: Built GRE connection |
| 302018 |
302018: Teardown GRE connection |
| 302019 |
302019: H.323 library failed to initialize |
| 302020 |
302020: Built inbound or outbound ICMP connection |
| 302021 |
302021: Teardown ICMP connection |
| 302022 |
302022: Built stub TCP connection |
| 302023 |
302023: Teardown stub TCP connection |
| 302024 |
302024: Built stub UDP connection |
| 302025 |
302025: Teardown stub UDP connection |
| 302026 |
302026: Built stub ICMP connection |
| 302027 |
302027: Teardown stub ICMP connection |
| 302033 |
302033: Preallocated H.323 GUP connection |
| 302034 |
302034: Unable to pre-allocate H323 GUP Connection |
| 302035 |
302035: Built inbound or outbound SCTP connection |
| 302036 |
302036: Teardown SCTP connection |
| 302302 |
302302: IPsec proxy mismatch |
| 302303 |
302303: Built TCP state-bypass connection |
| 302304 |
302304: Teardown TCP state-bypass connection |
| 302305 |
302305: Built SCTP state-bypass connection |
| 302306 |
302306: Teardown SCTP state-bypass connection |
| 303002 |
303002: FTP connection in progress |
| 303004 |
303004: FTP command unsupported |
| 303005 |
303005: Strict FTP inspection matched in policy map |
| 304001 |
304001: URL accessed |
| 304002 |
304002: Access denied to URL |
| 304003 |
304003: URL server timed out |
| 304004 |
304004: URL server request failed |
| 304005 |
304005: URL server request pending |
| 304006 |
304006: URL server not responding |
| 304007 |
304007: URL server not responding. Entering allow mode |
| 304008 |
304008: URL server is up. Leaving allow mode |
| 304009 |
304009: Run out of buffer blocks specified by url-block command |
| 305005 |
305005: No translation group found |
| 305006 |
305006: Translation creation failed |
| 305007 |
305007: Orphan IP |
| 305008 |
305008: Free unallocated global IP address |
| 305009 |
305009: Built dynamic or static translation |
| 305010 |
305010: Teardown dynamic or static translation |
| 305011 |
305011: Built TCP, UDP, or ICMP translation |
| 305012 |
305012: Teardown TCP, UDP, or ICMP translation |
| 305013 |
305013: Connection denied due to NAT reverse path failure |
| 305014 |
305014: Block of ports allocated for translation |
| 305016 |
305016: Unable to create connection |
| 308001 |
308001: Console enable password incorrect |
| 308002 |
308002: IP addresses specified in static commands overlap |
| 311001 |
311001: LU loading standby start |
| 311002 |
311002: LU loading standby end |
| 311003 |
311003: LU received thread update |
| 311004 |
311004: LU xmit thread update |
| 312001 |
312001: RIP hdr failed |
| 313001 |
313001: ICMP packet denied |
| 313004 |
313004: ICMP packet denied |
| 313005 |
313005: No matching connection for ICMP error message |
| 313008 |
313008: Denied ICMPv6 |
| 313009 |
313009: Denied invalid ICMP code |
| 314001 |
314001: Pre-allocated RTSP UDP backconnection |
| 314002 |
314002: RTSP failed to allocate UDP media connection |
| 314003 |
314003: RTSP traffic dropped |
| 314004 |
314004: RTSP client accessed RTSP URL |
| 314005 |
314005: RTSP client denied access to RTSP URL |
| 314006 |
314006: RTSP client exceeds configured rate limit |
| 315004 |
315004: Failed to establish SSH session |
| 315011 |
315011: SSH session disconnected by SSH server |
| 315012 |
315012: Weak SSH type provided |
| 315013 |
315013: SSH session rekeyed successfully |
| 316001 |
316001: New tunnel denied as VPN peer limit exceeded |
| 316002 |
316002: Error in VPN handle |
| 317001 |
317001: No memory available |
| 317002 |
317002: Bad path index |
| 317003 |
317003: IP routing table creation failure |
| 317004 |
317004: IP routing table limit warning |
| 317005 |
317005: IP routing table limit exceeded |
| 317006 |
317006: PDB index error |
| 317007 |
317007: Route added |
| 317008 |
317008: Route deleted |
| 317012 |
317012: Interface IP route counter negative |
| 318001 |
318001: Internal error |
| 318002 |
318002: Router flagged as an ABR without a backbone area |
| 318003 |
318003: Reached unknown state in neighbor state machine |
| 318004 |
318004: Problem locating link site advertisement |
| 318005 |
318005: Inconsistency between OSPF database and IP routing table |
| 318006 |
318006: Internal error |
| 318007 |
318007: OSPF enabled during IDB initialization |
| 318008 |
318008: OSPF process is changing router id |
| 318009 |
318009: Reference of stale data encountered in function |
| 318101 |
318101: Internal error |
| 318102 |
318102: ABR without backbone area |
| 318103 |
318103: Reached unknown state in neighbor state machine |
| 318104 |
318104: DB already exists |
| 318105 |
318105: Inconsistency between OSPF database and IP routing table |
| 318106 |
318106: Internal error |
| 318107 |
318107: OSPF is enabled during IDB initialization |
| 318108 |
318108: OSPF process is changing router-id |
| 318109 |
318109: OSPFv3 has received an unexpected message |
| 318110 |
318110: Invalid encrypted key |
| 318111 |
318111: SPI already in use with OSPF process |
| 318112 |
318112: SPI already being used by a process other than OSPF process |
| 318113 |
318113: SPI already configured |
| 318114 |
318114: The key length used with an SPI is not valid |
| 318115 |
318115: Error when attempting to create an IPsec policy for an SPI |
| 318116 |
318116: SPI not being used by OSPF process |
| 318117 |
318117: Policy could not be removed because it is in use |
| 318118 |
318118: Error when attempting to remove the IPsec policy |
| 318119 |
318119: Unable to close secure socket |
| 318120 |
318120: OSPFv3 unable to register with IPsec |
| 318121 |
318121: IPsec reported a general error |
| 318122 |
318122: IPsec sent a message to OSPFv3. Recovery attempted |
| 318123 |
318123: IPsec sent a message to OSPFv3. Recovery aborted |
| 318125 |
318125: Interface initilaization failed |
| 318126 |
318126: Interface attached to more than one area |
| 318127 |
318127: Could not allocate or find neighbor |
| 319001 |
319001: Acknowledgement of ARP update for IP address not received |
| 319002 |
319002: Acknowledgement of route update for IP address not received |
| 319003 |
319003: ARP update for IP address to network processor failed |
| 319004 |
319004: Route update for IP address failed |
| 320001 |
320001: Subject name of the peer cert not allowed for connection |
| 321001 |
321001: Resource limit reached |
| 321002 |
321002: Resource rate limit reached |
| 321003 |
321003: Resource log level reached |
| 321004 |
321004: Resource rate log level reached |
| 321005 |
321005: System CPU utilization reached a certain percentage |
| 321006 |
321006: System memory usage reached a certain percentage |
| 321007 |
321007: System is low on free memory blocks |
| 322001 |
322001: Deny MAC address |
| 322002 |
322002: ARP inspection check failed for request or response received from a host advertising an IP address that is statically or dynamically bound to another MAC address |
| 322003 |
322003: ARP inspection check failed for request or response received from a host advertising an IP address that is not bound to any MAC address |
| 322004 |
322004: No management IP address configured for transparent firewall. Dropping protocol packet |
| 323001 |
323001: Module experienced control communication failure |
| 323002 |
323002: Module unable to shut down. Shut down request not answered |
| 323003 |
323003: Module unable to reload. Reload request not answered |
| 323004 |
323004: Module failed to write new version of software |
| 323005 |
323005: Module cannot be started completely |
| 323006 |
323006: Module experienced data channel communication failure |
| 323007 |
323007: Module experienced firmware failure and recovery is in progress |
| 324000 |
324000: Drop GTPv |
| 324001 |
324001: GTPv0 packet parsing error |
| 324002 |
324002: No PDP exists to process GTPv0 |
| 324003 |
324003: No matching request to process GTPv |
| 324004 |
324004: GTP packet not supported |
| 324005 |
324005: Unable to create tunnel |
| 324006 |
324006: GSN tunnel limit exceeded |
| 324007 |
324007: Unable to create a GTP connection for response |
| 324008 |
324008: No PDP exists to update the data SGSN |
| 324300 |
324300: Radius accounting request has an incorrect request authenticator |
| 324301 |
324301: Radius accounting request has bad header |
| 325001 |
325001: Router has conflicting ND settings |
| 325002 |
325002: Duplicate address present |
| 325004 |
325004: IPv6 extension header |
| 325005 |
325005: Invalid IPv6 extension header content |
| 325006 |
325006: IPv6 extension header not in order |
| 326001 |
326001: Unexpected error in the timer library |
| 326002 |
326002: IGMP process failed to shut down |
| 326004 |
326004: Internal error occurred while processing a packet queue |
| 326005 |
326005: MRIB notification failed |
| 326006 |
326006: Entry creation failed |
| 326007 |
326007: Entry update failed |
| 326008 |
326008: MRIB registration failed |
| 326009 |
326009: MRIB connection opening failed |
| 326010 |
326010: MRIB unbinding failed |
| 326011 |
326011: MRIB table deletion failed |
| 326012 |
326012: Initialization of functionality failed |
| 326013 |
326013: Internal error |
| 326014 |
326014: Initialization failed |
| 326015 |
326015: Communication error |
| 326016 |
326016: Failed to set unnumbered interface |
| 326017 |
326017: Interface manager error |
| 326019 |
326019: Error in creating PIM RP tunnel interface |
| 326020 |
326020: Error in processing PIM interface list |
| 326021 |
326021: Error in setting the SRC of a PIM tunnel interface |
| 326022 |
326022: PIM process failed to shut down |
| 326023 |
326023: Error in processing PIM group range |
| 326024 |
326024: Internal error while processing packet queue |
